Rename/Icon Select

Changes the input source name and icon displayed on the front display or TV screen.

Input sources

AV 1–7, V-AUX, AUDIO 1–4, PHONO, USB, MULTI CH

Setup procedure

1 Use the cursor keys (e/r) to select a template and press the cursor key (w).

• You cannot change the template or icon for “USB” when an iPod is connected.

2Use the cursor keys (e/r) to select an icon and press the cursor key (w).

3Press ENTER to enter the name edit screen.

4Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.

• To clear the entry, select “CLEAR”.

5Use the cursor keys to select “OK” and press ENTER.

• To restore the default setting, select “RESET”.

6To exit from the menu, press ON SCREEN.

Decoder Mode

Sets the format of digital audio playback to “DTS”.

For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to “DTS”.

Input sources

AV 1–7, V-AUX, AUDIO 1–4 (available only when any audio digital input jack is assigned)

Settings

Auto (default)

Automatically selects an audio format to match the input audio signal.

DTS

Selects DTS only. (Other audio signals are not reproduced.)

 

 

Volume Interlock

Enables/disables volume controls from iTunes/iPod via AirPlay.

Input sources

AirPlay

Settings

Off

Disables volume controls from iTunes/iPod.

Limited (default)

Enables volume controls from iTunes/iPod within the limited range

(-80 dB to 0 dB and mute).

 

 

 

Full

Enables volume controls from iTunes/iPod in the full range (-80 dB to

+16.5 dB and mute).

 

 

 

Video Out

Selects a video to be output with the audio input source.

Input sources

TUNER, (network sources), USB, MULTI CH

Settings

Off

Does not output video.

AV 1–7, V-AUX

Outputs video input through the corresponding video input jacks.

 

 

Default

 

USB: V-AUX

 

Others: Off

 

CONFIGURATIONS Configuring input sources (Input menu)

En 93