Yamaha RX-A1030BL PLAYBACK, Basic playback procedure, Selecting an HDMI output jack

• To mute the audio output, press MUTE. Press MUTE again to unmute.

• To adjust the treble/bass settings, use the “Option” menu or TONE/BALANCE on the front panel (p.88).

On-screen input selection

a Press ON SCREEN.

b Use the cursor keys to select “Input” and press ENTER. c Use the cursor keys to select the desired input source and

press ENTER.

Press VOLUME to adjust the volume.

4

PLAYBACK

Basic playback procedure

1 Turn on the external devices (such as a TV or BD/DVD player) connected to the unit.

2 Use the input selection keys to select an input source.

3 Start playback on the external device or select a radio station.

Refer to the instruction manual for the external device.

For details on the following operations, see the corresponding pages.

• Listening to FM/AM radio (p.58)

• Playing back iPod music (p.65)

• Playing back music stored on a USB storage device (p.69)

• Playing back music stored on media servers (PCs/NAS) (p.72)

• Listening to Internet radio (p.75)

• Playing back iTunes/iPod music via a network (AirPlay) (p.77)

SOURCE RECEIVER

	AV
1	2	3	4
5	6	7	V-AUX
	AUDIO			Input selection keys
1	2	3	4
PHONO	MULTI	USB	NET
TUNER
MAIN ZONE 2		PARTY	HDMI OUT	HDMI OUT
	SCENE
1	2	3	4	MUTE
BD/DVD	TV	NET	RADIO
PROGRAM MUTE		VOLUME		VOLUME
TOP MENU		POP-UP/MENU		ON SCREEN
ON			OPTION
SCREEN

Selecting an HDMI output jack

1Press HDMI OUT to select an HDMI OUT jack.

Each time you press the key, the HDMI OUT jack to be used for signal output changes.

DOCK	H D M I  O U T  S e l .
TAG
HD		MUTE VOLUME
STEREO TUNED PRE AMP PARTY
ZONE ZONE ZONE	   O U T  1 + 2	ADAPTIVE DRC
IN OUT1 OUT2 2 3 4		PL L C R PR
ENHANCER SLEEP		SL SW1 SW SW2 SR
HD 3		PL SBL SB SBR PR

ENTER	Cursor keys
	ENTER
RETURN	DISPLAY
	BAND
MODE
TUNING	PRESET

OUT 1+2

OUT 1

OUT 2

Outputs the same signal at both the HDMI OUT 1 and HDMI OUT 2 jacks.

Output the signals at the selected HDMI OUT jack.

									SUR. DECODE						STRAIGHT
MOVIE				MUSIC
									ENHANCER				PURE DIRECT
		INFO		SLEEP
1	2			3		4
5
							6			7					8
								MEMORY
															ENT
			9		0								10
								TV
INPUT
					TV VOL							TV CH
		MUTE													CODE SET

Off Does not output the signals at the HDMI OUT jacks.

•You can also select an HDMI output jack by selecting a scene (p.50).

•When “OUT 1+2” is selected, the unit outputs video signals at the highest resolution supported by both TVs (or projectors) connected to the unit. (For example, if you have connected a 1080p TV to the HDMI OUT 1 jack and a 720p TV to the HDMI OUT 2 jack, the unit outputs 720p video signals.)

•If the HDMI OUT 2 jack is assigned to Zone2 (“HDMI OUT2 Assign” (p.113)), you can turn on/off each zone by pressing HDMI OUT repeatedly.

PLAYBACK ➤ Basic playback procedure En 49