Yamaha RX-A1030BL Controlling external devices with the remote control, ■TV operations, Registering the remote control code for a TV

			SOURCE
	SOURCE	RECEIVER
		AV
1	2	3	4

Controlling external devices with the remote control

5

6

7

V-AUX

AUDIO

1

2

3

4

PHONO

MULTI

USB

NET

TUNER

2

PARTY

HDMI OUT

MAIN

ZONE

SCENE

1

2

3

4

BD/DVD

RADIO

TV

NET

PROGRAM

MUTE

VOLUME

TOP MENU

POP-UP/MENU

ON

SCREEN

OPTION

ENTER

DISPLAY

RETURN

BAND

MODE

TUNING

PRESET

STRAIGHT

SUR. DECODE

MOVIE

MUSIC

ENHANCER

PURE DIRECT

INFO

SLEEP

1

2

3

4

5

6

7

8

Numeric keys

MEMORY

9

0

10

ENT

TV

TV operation keys

INPUT

MUTE

TV VOL

TV CH

TV z

CODE SET

CODE SET

You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device.

•You cannot control an external device that does not have a remote control sensor.

•Ensure that the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control operations may not work properly.

•If the unit’s remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert new batteries and register the codes again.

•Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI Control-compatible devices connected to the unit with the remote control. (This function may not work depending on the specification of the external device.)

Registering the remote control code for a TV

You can use the unit’s remote control to operate a TV if you have registered its remote control code.

•You can also register your TV’s remote control code to the unit’s input selection keys (p.124). This would allow you to use the cursor keys or numeric keys to operate the TV (this function may not be available on some TV models).

•(China, Korea, U.K. and Europe models only)

You can also assign a function to each key using the learning function (p.125).

1Use “Remote Control Code Search” in the CD-ROM to find your TV’s remote control code.

•If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes.

2Press CODE SET.

SOURCE blinks twice.

Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2.

3Press TV z.

4Use the numeric keys to enter the 4-digit remote control code.

Once the remote control code is successfully registered, SOURCE blinks twice.

If it blinks six times, registration has failed. Repeat from Step 2.

■TV operations

Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit.

	INPUT	Switches the video inputs of the TV.
	MUTE	Mutes the audio output of the TV.
TV operation keys TV VOL		Adjust the volume of the TV.
	TV CH	Switch the channels of the TV.
	TV z	Turns on/off the TV.

CONFIGURATIONS ➤ Controlling external devices with the remote control En 123