BASIC PLAYBACK

Notes

•The DTS 96/24 decoder and the DTS ES decoder cannot be activated at the same time while playing the DTS 96/24 signal. When “AUTO” is selected, the DTS 96/24 decoder has precedence over the DTS ES decoder.

•6.1-channel playback is not possible even if EX/ES is pressed in the following cases:

–When “1C REAR L/R SP”is set to “NONE”.

–When the sound effect is turned off.

–When the source connected to the 6CH INPUT jack is being played.

–When the source being played does not contain rear L/R channel signals.

–When Dolby Digital KARAOKE source is being played.

–When headphones are connected.

–When “8ch Stereo” is selected.

•When the power of this unit is turned off, the input mode will be reset to AUTO.

■Virtual CINEMA DSP

With the Virtual CINEMA DSP, you can enjoy all the DSP programs without rear speakers. It creates the virtual speakers to reproduce the natural sound field.

The sound field processing is changed to the Virtual CINEMA DSP mode according to the selected DSP program by setting “1C REAR L/R SP” on the SET MENU to NONE.

Notes

•This unit is not set in the virtual CINEMA DSP mode even if “1C REAR L/R SP” is set to NONE in the following cases:

– when the 8ch Stereo, DOLBY DIGITAL Normal, Pro Logic Normal, Pro Logic , DTS Normal or Neo: 6 program is selected;

–when the sound effect is turned off;

–when 6CH INPUT is selected as the input source;

–when using the test tone; or

–when connecting the headphones.

•When over 48 kHz sampling digital signal is being input, this unit reproduces sound in the virtual CINEMA DSP mode after converting the sampling frequency to 48 kHz or below.

■SILENT CINEMA DSP

You can enjoy the powerful sound field as if there were actual speakers with the SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. Enjoy all the DSP program using the headphones. The “SILENT” indicator lights up on the front panel display. (If the sound effect is off, you listen to the source with normal stereo reproduction.)

Notes

•When 6CH INPUT is selected as the input source, this unit is not set in the SILENT CINEMA DSP mode even if the sound effect is on.

•When over 48 kHz sampling digital signal is being input, this unit reproduces sound in the CINEMA DSP mode after converting the sampling frequency to 48 kHz or below.

■Normal Stereo Reproduction

Press STEREO/EFFECT to turn off the sound effect for normal stereo reproduction.

Press STEREO/EFFECT again to turn the sound effect back on.

STEREO

STEREO

EFFECT

or

EFFECT

 

Front panel

Remote control

Notes

•If “1B MAIN SP” on the SET MENU is set to “SMALL” and “1E LFE/BASS OUT” is set to “SWFR”, or “1E LFE/BASS OUT” is set to “BOTH”, the LFE signals will be output from the subwoofer.

•If you turn off the sound effect while a Dolby Digital or DTS signal is being output, the dynamic range of the signal is automatically compressed and the sounds of the center and rear speaker channels are mixed and output from the main speakers.

•The volume may be greatly reduced when you turn off the sound effect or if you set “11 D-RANGE” on the SET MENU to MIN. In this case turn on the sound effect.

■Displaying the information about the input source

During the stereo reproduction, you can display the information such as the type, format and sampling frequency of the signal input from the component connected to this unit.

(During playback)

1 Set PARAMETER/SET

PARAMETER

MENU to PARAMETER.

SET MENU

 

 

 

 

 

 

 

 

 

2 Press k/nto display the information about the input signal.

PARAMETER

ON SCREEN LEVEL

SET MENU

SLEEP TEST

34