11 D-RANGE (dynamic range)
Use this feature to adjust the dynamic range. This setting is effective only when this unit decodes Dolby Digital signals.
11 D-RANGE
≥S P : M A X S T D M I N
H P : M A X S T D M I N
Choices: MAX, STD, MIN
Initial setting: MAX (for both speakers and headphones)
MAX
Select the “MAX” setting for feature films.
STD
Select the “STD” (Standard) setting for general use.
MIN
Select the “MIN” setting for listening to sources at extremely low volume levels.
SET MENU
12 SP DELAY
Use this feature to adjust the delay of the Center and the Rear Center channel sounds. This feature works when there is sound output from the center speakers with a source like Dolby Digital or DTS, etc. Ideally, the Center speaker and the Rear Center speaker should be the same distance from the main listening position as the left and right Main speakers. However, in most home situations, the Center speaker or the Rear Center speaker is placed in line with the Main speakers or the Rear speakers. By delaying the sound from the Center speaker and the Rear Center speaker, the apparent distance from the Center speaker and the Rear Center speaker to the main listening position can be adjusted to make it seem the same as the distance between the left and right Main speaker, and the left and right Rear speakers to the listening position. Adjusting the delay time for the Center speaker is especially important for giving depth to the dialogue.
1 Press k / n to select “UNIT”.
2 Press
Select one from “msec”, “meters”, and “feet”.
Notes
•Setting items change depending on the unit chosen.
•When “meters” or “feet” is selected, enter the distance from your listening position to each speaker.
3 Press k / n to select the speaker for which the delay is adjusted.
4 Press
Press + for higher value and – for lower value.
12 SP DELAY
≥U N I T … … … … … … … … m s e c C E N T E R … … … … … 0 . 0 m s R E A R C T … … … … 3 . 0 m s
OPERATION | ADVANCED |
|
|
Center speaker image
C
L C R
RL RC RR
RC
English
69