Yamaha RX-V3300 ■Tuner

TROUBLESHOOTING

Problem	Cause	Remedy

The sound is degraded	This unit is in the standby mode.	Turn on the power of this unit.
when listening with
headphones connected
to a tape deck or CD
player that is connected
to this unit.

There is noise	This unit is too close to the digital or high-	Move this unit further away from such equipment.
interference from digital	frequency equipment.
or high-frequency
equipment, or this unit.

This unit suddenly	The internal temperature becomes too high	Wait until this unit cools down and then turn it back on.
turns into the standby	and the overheat protection circuitry has
mode.	been activated.

■Tuner

		Problem	Cause	Remedy

	FM/	Previously preset	This unit has been disconnected for a	Re-store the stations.
	FM/	stations can no longer	long period.
	AM	stations can no longer	long period.
	AM	be tuned in.
		be tuned in.

		FM stereo reception is	The characteristics of FM stereo	Check the antenna connections.
		noisy.	broadcasts may cause this problem	Try using a high-quality directional FM antenna.
			when the transmitter is too far away or	Use the manual tuning method.
			the antenna input is poor.

		There is distortion, and	There is multipath interference.	Adjust the antenna position to eliminate multipath
	FM	clear reception cannot		interference.
	FM	be obtained even with a
		be obtained even with a
		good FM antenna.

		The desired station	The station is too weak.	Use the manual tuning method.
		cannot be tuned in with		Use a high-quality directional FM antenna.
		the automatic tuning
		method.

		The desired station	The signal is weak or the antenna	Tighten the AM loop antenna connections and orient it for
		cannot be tuned in with	connections are loose.	best reception.
		the automatic tuning		Use the manual tuning method.
		method.

	AM	There are continuous	Noises result from lightning,	Use an outdoor antenna and a ground wire. This will help
	AM	crackling and hissing	fluorescent lamps, motors, thermostats	somewhat, but it is difficult to eliminate all noise.
		crackling and hissing	fluorescent lamps, motors, thermostats	somewhat, but it is difficult to eliminate all noise.
		noises.	and other electrical equipment.

		There are buzzing and	A TV set is being used nearby.	Move this unit away from the TV.
		whining noises
		(especially in the
		evening).

86

Contents

AV Receiver IMPORTANT SAFETY INSTRUCTIONS FCC INFORMATION (for US customers) CAUTION CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Installing Batteries in the Remote Control CONTROLS AND FUNCTIONS Front Panel ■Opening and closing the front panel door Remote Control Using the Remote Control Front Panel Display Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement Connecting the Speakers ■MAIN SPEAKERS terminals ■REAR SPEAKERS terminals ■CENTER SPEAKER terminals ■REAR CENTER SPEAKER terminals ■FRONT EFFECT SPEAKERS terminals ■IMPEDANCE SELECTOR switch CONNECTIONS Before Connecting Components Connecting Video Components Page Page Connecting Audio Components Page Connecting the Antennas Connecting to an External Amplifier Connecting to the 6CH INPUT Jacks Connecting the Power Supply Cords Turning on the Power ON-SCREENDISPLAY (OSD) Selecting the OSD Mode OSD Modes P01 CONCERT HALL SPEAKER MODE SETTINGS Summary of SPEAKER SET Items 1A through 1H ADJUSTING THE SPEAKER OUTPUT LEVELS Before You Begin TEST DOLBY SUR TEST DOLBY SUR TEST DSP TEST DSP BASIC PLAYBACK ■BGV (background video) function ■To mute the sound ■When you have finished using this unit Input Modes and Indications Selecting a Sound Field Program Selecting PRO LOGIC PRO LOGIC or Neo: ■Virtual CINEMA DSP ■SILENT CINEMA DSP ■Normal Stereo Reproduction ■Displaying the information about the input source DIGITAL SOUND FIELD PROCESSING (DSP) Understanding Sound Fields Hi-FiDSP Programs CINEMA-DSP Straight Decode Sound Field Effect Features of DSP Programs Page Page Table of Program Names for Each Input Format TUNING Automatic and Manual Tuning Presetting Stations ■Manually presetting stations 3 4 2,5 A :AM 630 kHz C3:AM 630 kHz C :AM 630 kHz Tuning in to a Preset Station Exchanging Preset Stations BASIC RECORDING REMOTE CONTROL FEATURES Control Area Setting the Manufacturer Code Learn Feature Display Window Using the Macro Feature ■Operating the macro ■Programming a macro Clearing Learned Functions Macros, Renamed Source Names and Setup Manufacturer Codes Clearing a Learned Function Clearing a Macro Function ■SOURCE SELECT k / n ■OPTN (option) area ■Zone ■Light up function Each Component Control Area Operating a TV/digital TV ■Operating an LD player (D-TV/LDarea) ■Operating a CD player (CD area) ■Operating a CD recorder (CD-Rarea) or an MD recorder (MD/TAPE area) ■Operating a tape deck (MD/TAPE area) ■Operating a tuner (TUNER area) ■Operating the component set in Å or ı SET MENU Adjusting the Items on the SET MENU SET MENU 1/4 2 LOW FRQ TEST 1SPEAKER SET (speaker mode settings) 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D REAR CT SP 1E LFE/BASS OUT 1F FRONT EFCT SP 1G MAIN LEVEL 1H SP B SET 2 LOW FRQ TEST 3 L/R BALANCE 4HP TONE CTRL (headphone tone control) 4 HP TONE CTRL 6 INPUT RENAME 6 INPUT RENAME 5CENTER GEQ (center graphic equalizer) 7 I/O ASSIGNMENT 7A CMPNT-VINPUT 7B OPTICAL OUT 7C OPTICAL IN 7D COAXIAL IN 8INPUT MODE (initial input mode) 8 INPUT MODE 10 LFE LEVEL 10 LFE LEVEL 9 PARAM. INI 11 D-RANGE(dynamic range) 11 D-RANGE 12 SP DELAY 12 SP DELAY 13DISPLAY SET 13 DISPLAY SET 14 MEMORY GUARD 14 MEMORY GUARD 15 6CH INPUT SET 15A CENTER to 15B SWFR to 16 ZONE2 SET 16 ZONE2 SET ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS SLEEP TIMER Setting the Sleep Timer Canceling the Sleep Timer ZONE Zone 2 Connections Remote Control in Zone SOUND FIELD PROGRAM PARAMETER EDITING What Is a Sound Field Sound Field Program Parameters Changing Parameter Settings P05 ROCK CONCERT Resetting a Parameter to the Factory-setValue DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS ■ LIVENESS Control Range 0 – ■ S. DELAY (Surround Delay) Control Range 0 – 49 msec (The range depends on the signal format.) ■ REV. TIME (Reverberation Time) Control Range 1.0 – 5.0 sec ■ REV. DELAY (Reverberation Delay) Control Range 0 – 250 msec ■ REV. LEVEL (Reverberation Level) For 8ch Stereo ■ CT LEVEL (Center Level) ■ RL LEVEL (Rear Left Level) ■ RR LEVEL (Rear Right Level) ■ RC LEVEL (Rear Center Level) TROUBLESHOOTING Page Page ■Tuner ■ Remote control GLOSSARY ■LFE 0.1 channel ■ CINEMA DSP ■SILENT CINEMA ■S VIDEO signal ■Component video signal SPECIFICATIONS