SET MENU

1F FRONT EFCT SP (front effect speaker mode)

This unit uses front effect speakers to localize the virtual sound sources of the sound field programs. If you do not use front effect speakers, you can direct the front effect signals to the main speakers.

The OSD shows small or no front effect speakers depending on how you set this item.

Choices: YES, NONE

Initial setting: YES

YES

Select this setting if you use front effect speakers.

1F FRONT EFCT SP

Y E S N O N E

NONE

Select this setting if you do not use front effect speakers. The front effect signals are mixed with the main channels.

1F FRONT EFCT SP

Y E S N O N E

1G MAIN LEVEL (main level mode)

Change this setting if you cannot match the output level of the center, rear (L/R) and rear center speakers with the main speakers because of the unusually high-efficiency performance of the main speakers.

Choices: Normal, –10 dB

Initial setting: Normal

Normal

Select this if you can match the output level of your effect speakers with that of your main speakers when using the test tone.

1G MAIN LEVEL

Normal - 10dB

–10 dB

Select this if you cannot match the output level of your effect speakers with that of your main speakers when using the test tone.

1G MAIN LEVEL

Normal - 10dB

1H SP B SET (speaker B set)

Use this feature to select the location of the main speakers to be connected to the SPEAKERS B terminals.

Choices: MAIN, ZONE B

Initial setting: MAIN

MAIN

Select this to turn on/off SPEAKERS A and B when the speakers connected to the SPEAKERS B terminals are set in the main room.

1H SP B SET

“MAIN ZONE B

-/+ : Select / : Exit

ZONE B

Select this if the speakers connected to the SPEAKERS B terminals are set in the second room. If SPEAKERS A is turned OFF and SPEAKERS B is turned ON, all the effect speakers in the main room are muted and the sound is output only from SPEAKERS B.

1H SP B SET

M A I N “ Z O N E B

-/ + : S e l e c t / : E x i t

y

When a DSP program is selected, this unit automatically enters the Virtual CINEMA DSP mode. If the headphones are connected to PHONES jack on this unit in the Virtual CINEMA DSP mode, this unit enters the SILENT CINEMA DSP mode and the sound is output from both headphones and

SPEAKERS B.

64