WARNING
Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged.
IF THIS UNIT FAILS TO TURN ON WHEN THE STANDBY/ ON SWITCH IS PRESSED, the IMPEDANCE SELECTOR switch may not be fully set to either end. If so, set the switch to either end fully.
IMPEDANCE SELECTOR
(U.S.A. model)
IMPEDANCE SELECTOR
SET BEFORE POWER ON
MAIN
A OR B: 4ΩMIN. /SPEAKER
A + B: 8ΩMIN. /SPEAKER
CENTER: 6ΩMIN. /SPEAKER
REAR : 6ΩMIN. /SPEAKER
MAIN
A OR B: 8ΩMIN. /SPEAKER
A + B:I6ΩMIN. /SPEAKERMAINS
CENTER: 8ΩMIN. /SPEAKER
REAR : 8ΩMIN. /SPEAKER
AC OUTLETS
SWITCHED
100W MAX. TOTAL
L
20
Select the position whose requirements your speaker system meets.
(Upper position)
Main: If you use one pair of main speakers, the impedance of each speaker must be 4Ω or higher.
If you use two pairs of main speakers, the impedance of each speaker must be 8Ω or higher.
Center: The impedance of the speaker must be 6Ω or higher.
Rear: The impedance of each speaker must be 6Ω or higher.
(Lower position)
Main: If you use one pair of main speakers, the impedance of each speaker must be 8Ω or higher.
If you use two pairs of main speakers, the impedance of each speaker must be 16Ω or higher.
Center: The impedance of the speaker must be 8Ω or higher.
Rear: The impedance of each speaker must be 8Ω or higher.
20 | 6/23/99, 4:09 PM |