Faintly colored buttons do not function.
Note: TV POWER and TV VOLUME function if you have preset the code for your TV.
1
Indicator window: Displays the names of components which can be controlled.
2
3
t
Indicator: Flashes in red when the button is pressed.
SELECTOR DIAL: Selects the component to be controlled.
1POWER
This button turns this unit on.
2INPUT
Press these buttons to select the program source.
3EXT. DEC.
Press this button when using a external decoder.
4A/B/C/D/E
Press this button to select a group of preset stations.
5DSP selector
Press this button. While the indicator lights up for about three seconds, select a DSP program using the number buttons (1 to 8). No DSP program can be selected after the indicator goes off.
4
5
6
7
8
9
(TV POWER)
q
r
■DSP2
y | 6PRESET |
| |
u | Press these buttons to select the preset station number. | ||
7VOLUME ( |
| ||
|
| ) | |
|
| Press these buttons to adjust the volume level. | |
|
| ||
| (TV VOLUME) | 8MUTE |
|
|
| ||
|
| Press this button to mute the sound. To cancel mute, press this | |
|
| button once more, or press the operation buttons of this unit. | |
9SLEEP
Press this button to set the SLEEP timer.
pq
(LEFT)
a | This button is used to adjust the settings of the SET MENU | |
mode and the TIME/LEVEL mode. | ||
| ||
s | rTIME/LEVEL | |
| Press this button to select the item in the TIME/LEVEL mode. | |
f | tSTANDBY | |
| Press this button to turn this unit into Standby mode. | |
| yTEST | |
| Press this button to output a test tone for adjusting the output | |
| level of the speakers. | |
| uEFCT (EFFECT) ON/OFF | |
| Press this button to switch the DSP program on or off. | |
| p (BACK) | |
| Press this button to go back one selection in the SET MENU | |
| mode and TIME/LEVEL mode. | |
| a (RIGHT) | |
| This button is used to adjust the settings of the SET MENU | |
| mode and the TIME/LEVEL mode. | |
| s (NEXT) | |
| Press this button to advance one selection in the SET MENU | |
| mode and TIME/LEVEL mode. | |
| fSET MENU | |
| Press this button to select functions in the SET MENU mode. | |
|
| |
| 2DSP program | |
| Press these buttons to select the DSP program (1 to 8). When | |
| you select the input source, set the SELECTOR DIAL to the | |
| AMP/TUN position. | |
| Note: The function of all buttons other than DSP program is | |
| the same as with the AMP/TUN position. |
46
46 | 6/23/99, 4:11 PM |