4 Set BASS, TREBLE and BALANCE to the “0” position.
Front panel
5 Press TEST (so that “TEST LEFT” appears on the display).
Remote control
Appears.
6 Turn up the volume.
Remote control
You will hear a test tone (like pink noise) from the left main speaker, then the center speaker, then the right main speaker, then the right rear speaker, and then the left rear speaker, for about two seconds each. The display changes as shown below.
Main (L)
Center
Main (R)
Rear (R)
Rear (L)
*If the function “1. CNTR” in the SET MENU mode is set to the NONE position, you will hear the center channel test tone from the left and right main speakers.
7 Adjust BALANCE so that the sound output level of the left main speaker and the right main speaker is the same.
Front panel
25
English
25 | 6/23/99, 4:10 PM |