You can also make use of an automatic preset tuning function for FM stations only. Using this function, this unit performs automatic tuning and sequentially stores FM stations with strong signals. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on page 32. Note that a new setting can be stored in place of the former one.
3 1
2 4
To store stations
1 Select the FM.
Front panel
2 Press TUNING MODE (so that the “AUTO TUNING” indicator lights up on the display).
Front panel
Lights up.
3 Press MEMORY and hold for about three seconds.
Front panel
Flashes.
4 To tune in to higher frequencies, press the UP side of TUNING once.
To tune in to lower frequencies, press the DOWN side of TUNING once.
Front panel
*If TUNING is not pressed, in a while, the automatic preset tuning begins automatically toward higher frequencies.
The automatic preset tuning begins from the frequency currently displayed. Received stations are stored to A1, A2
... A8 sequentially.
*If more than 8 stations are received, they are also stored to the preset station numbers in other groups (B, C, D and E) in that order.
If you want to store the first station received by the automatic preset tuning to a desired preset station number.
For example, if you want to store the first received station to C5, select “C5” while “A1”, the “MEMORY” indicator and the “AUTO TUNING” indicator flash after pressing MEMORY in step 3. Then press TUNING. The first received station is stored to C5, and next stations to C6, C7 ... sequentially.
If stations are stored up to E8, automatic preset tuning stops automatically.
When automatic preset tuning is finished
The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedures in the section “To recall a preset station” on page 33.
34
34 | 6/23/99, 4:11 PM |