8.C.DELAY [Adjusting the delay of center sounds (dialog etc.)]

Control range: 0 ms to 5 ms (in 1 ms step)

Preset value: 0 ms

*This adjustment is effective only when the Dolby Digital is decoded and the signals of selected source encoded with the Dolby Digital contain center-channel signals.

Adjusts the delay between the main sounds (at the main channels) and dialog etc. (at the center channel).

The larger the value, the later the dialog etc. is generated.

This is for making sounds from the left main, center and right main speakers reach your listening position at the same time. This is achieved by delaying the sound from the center speaker if the distance from the center speaker to your listening position is shorter than the distance from the left or right main speaker to your listening position.

9. GUARD

Choices: ON/OFF

Preset position: OFF

If you wish to prevent accidental alteration to SET MENU and other adjustments on this unit, select ON. The following functions on this unit can be locked by this operation.

•Functions in the SET MENU mode

•Functions in the TIME/LEVEL mode

•Functions when using TEST

10.INPUT (Selecting the initial input mode of the sources connected to the TV/DBS input terminals)

For the sources connected to the TV/DBS input terminals of this unit only, you can designate the input mode that is automatically selected when the power of this unit is switched on.

AUTO: In this position, the AUTO input mode is always selected when the power of this unit is switched on.

LAST: In this position, the input mode you selected last time is memorized and will not be changed even if the power of this unit is switched on.

* See page 29 for details on switching the input mode.

Adjusting method

Operations should be made while watching the information on this unit’s display.

If you are using the remote control transmitter, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control transmitter.

or

Press SET MENU once or more so that the title of function which you want to change appears on the display.

Front panel

Remote control

or

*After pressing SET MENU once on the remote control

transmitter, you can also select the title by pressing . (Pressing goes back one selection.)

Press + or –to select any desired position or edit parameters on the function.

 

 

 

Front panel

Remote control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

Repeat these steps to change and adjust settings on any other function.

44

01RX-V595-e/f5

44

6/23/99, 4:11 PM