Yamaha RX-V659 ■Using the external amplifier, ■Using the internal amplifier of this unit, ADVANCED, OPERATION, IMPORTANT SAFETY NOTICE

USING MULTI-ZONE CONFIGURATION

■Using the external amplifier

To use the external amplifiers in Zone 2, select “EXT” in “ZONE2 AMP” (see page 96).

	Main zone	Second zone
		ZONE 2 OUTPUT
	SP OUT
		Amplifier
	MONITOR OUT
DVD player	AUDIO IN	Remote control
	VIDEO IN
	This unit
	MAIN ZONE
	ZONE 2	Infrared signal receiver
	Infrared signal emitter
	REMOTE OUT	REMOTE IN

Notes

•When you do not use the main zone, press MAIN ZONE ON/OFF on the front panel to turn off the main zone. Adjust the volume control on the amplifier in the second zone.

•To avoid unexpected noise, DO NOT USE the Zone 2 feature with CDs encoded in DTS.

■Using the internal amplifier of this unit

To use the internal amplifiers of this unit, select “INT” in “ZONE2 AMP” (see page 96).

PRESENCE/ZONE 2

This unit

Main zone Second zone

IMPORTANT SAFETY NOTICE

The PRESENCE/ZONE2 speaker terminals of this Receiver should not be connected to a Passive Loudspeaker Selector Box or more than one loudspeaker per channel.

Connection to a Passive Loudspeaker Selector Box or multiple speakers per channel could create an abnormally low impedance load resulting in amplifier damage. See this owner’s manual for correct usage.

Compliance with minimum speaker impedance information for all channels must be maintained at all times. This information is found on the back panel of your Receiver.

OPERATION ADVANCED

105