OSD shift OSD SHIFT

Use this feature to adjust the vertical position of the OSD. Control range: –5 (upward) to +5 (downward)

Control step: 1

Initial setting: 0•Press jto raise the position of the OSD.•Press ito lower the position of the OSD.

Gray back GRAY BACK

Use this feature to display a gray background in the OSD when there is no video signal being input.

Choices: AUTO, OFF

•Select “AUTO” to display a gray background in the OSD when there is no video signal being input.

•Select “OFF” not to display any background in the OSD.

Notes

•Depending on the video signals being input or the system setting of your video monitor (NTSC or PAL), the OSD may be displayed abnormally. In such cases, set “GRAY BACK” to “OFF”.

•Even when “GRAY BACK” is set to “OFF”, the OSD may not be displayed correctly depending on the conditions of the picture.

■Memory guard B)MEMORY GUARD

Use this feature to prevent accidental changes to DSP program parameter values and other system settings. Choices: OFF, ON

B)MEMORYGUARD

>OFFON

[<]/[>]:Select

[ENTER]:Return

•Select “OFF” to turn off the “MEMORY GUARD” feature.•Select “ON” to protect:–DSP program parameters–all “SET MENU” items–all speaker levels

Note

When “MEMORY GUARD” is set to “ON”, you cannot select and adjust any other “SET MENU” items.

SET MENU

■Parameter initialization C)PARAM. INI

Use this feature to initialize the parameters of each sound field program within a sound field program group. When you initialize a sound field program group, all of the parameter values within that group revert to their initial factory settings.

Press the corresponding sound field program selector buttons on the remote control to select the sound field program that you want to initialize.

An asterisk (*) appears to the left of the sound field program names that have been changed from their initial factory settings.

Choices: STEREO, MUSIC, ENTERTAINMENT, MOVIE THEATER, STANDARD

C)PARAM.INI

STEREO *MUSIC

ENTERTAINMENT MOVIE THEATER

*STANDARD Press DSP key

Notes

•You cannot automatically revert to the previous parameter settings once you initialize a sound field program group.

•You cannot separately initialize individual sound field programs.

•You cannot initialize any sound field program groups when “MEMORY GUARD” is set to “ON” (see page 95).

OPERATION

ADVANCED

 

 

95