Yamaha RX-V659 AUTO, Press, Speaker level LVL, Number of speakers SP, Speaker distance DIST, ENTER to start the setup procedure, 5Press d to select “START” and then press

AUTO SETUP

4Press u / d to select “SETUP” and then press j / i to select the desired setting.

PRESET/CH			PRESET/CH
ENTER			ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

Choices: AUTO, RELOAD, UNDO, DEFAULT•Select “AUTO” to automatically run the entire “AUTO SETUP” procedure.

•Select “RELOAD” to reload the last “AUTO SETUP” settings and override the previous settings.

•Select “UNDO” to undo the last “AUTO SETUP” settings and restore the previous settings.

•Select “DEFAULT” to reset the “AUTO SETUP” parameters to the initial factory settings.

Note

“RELOAD” or “UNDO” is available only when you have previously run “AUTO SETUP” and confirmed the results.

5Press d to select “START” and then pressENTER to start the setup procedure.

Loud test tones are output from each speaker and “WAITING” appears in the OSD during the “AUTO:CHECK” procedure. Once all items are set, the “RESULT:EXIT” display appears in the OSD.

PRESET/CH			PRESET/CH
ENTER			ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

The display changes as follows.

1 AUTO:MENU

SETUP;;;;;;;AUTO

.
START

Automatic processing of all items

[
]/[
]:Up/Down

[<]/[>]:Select

1 AUTO:CHECK

INITIALIZING

.
WIRING SIZE/DISTANCE EQUALIZING LEVEL

CHECK CH=CENTER

;;;;;;;;

[p
]: Exit

RESULT:EXIT

. WARNING (3)

RESULT

. SP : 5/4/0.1

. DIST: 14.0/ 17.0ft

. LVL : -9.0/ +6.5dB

>SET CANCEL

[
]/[
]:Up/Down

[ENTER]:Enter

The results displayed under “RESULT” are as follows:Number of speakers SP

Displays the number of speakers connected to this unit in the following order: Front/Back/Subwoofer

Speaker distance DIST

Displays the speaker distance from the listening position in the following order:

Closest speaker distance/Farthest speaker distanceSpeaker level LVLDisplays the speaker output level in the following order:Lowest speaker output level/Highest speaker output level

34