Yamaha RX-V659 ■Center graphic equalizer D)EQUALIZER, OFF, CENTER GEQ, Test tone TEST, Equalizer select EQ TYPE SELECT, Center graphic equalizer CENTER GEQ, Choices: OFF, ON

SET MENU

Notes

•“CENTER”, “SUR. L”, “SUR. R”, “SB L”, “SB R”, “SWFR”, “PRNS L” and “PRNS R” cannot be adjusted if “CENTER SP” (see page 87), “SUR. L/R SP” (see page 87), “SUR. B L/R SP” (see page 87), “LFE/BASS OUT” (see page 88) and “PRESENCE SP” (see page 87) are set to “NONE” respectively.

•Instead of “SB L” and “SB R”, “SUR. B” is displayed if “SUR. B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 87).

■Center graphic equalizer D)EQUALIZER

Use this feature to select the parametric equalizer or the graphic equalizer.

Equalizer select EQ TYPE SELECT

Use this feature to select the type of equalizer. Choices: AUTO PEQ, CENTER GEQ, EQ OFF

D)EQUALIZER

EQ TYPE SELECT

. CENTER GEQ

p/p : CT GEQ

[<]/[>]:Select

• Select “AUTO PEQ” to use the parametric equalizer adjusted in “AUTO SETUP” (see page 32).

• Select “CENTER GEQ” to adjust the built-in 5- frequency band graphic equalizer for the center speaker so that the tonal quality of the center speaker matches that of the front left and right speakers.

• Select “EQ OFF” to deactivate the equalizing feature.

Notes

•“AUTO PEQ” is automatically selected when you run “AUTO SETUP” (see page 32).•If you press u/ dwhile “CENTER GEQ” is selected, theOSD changes to the following screen.

Center graphic equalizer CENTER GEQ

When you select “CENTER GEQ” in “EQ TYPE SELECT”, use this feature to adjust the built-in 5- frequency band (100Hz, 300Hz, 1kHz, 3kHz and 10kHz) graphic equalizer for the center channel so that the tonal quality of the center speaker matches that of the front left and right speakers. You can make adjustments while listening to the currently selected source component or a test tone.

Control range: –6.0 to +6.0 dB

Control step: 0.5 dB

Initial setting: 0.0 dB

D)EQUALIZER

.
TEST

>OFF

ON

-______+

100Hz ;;;;;; 0dB

300Hz ;;;;;; 0dB

1kHz ;;;;;; 0dB

3kHz ;;;;;; 0dB

10kHz ;;;;;; 0dB

[
]/[
]:Up/Down

[<]/[>]:Adjust

y

Press u/ dto select a frequency band and j/ ito adjust the selected frequency band.

Test tone TEST

Use this feature to make adjustments of “CENTER GEQ” while listening to a test tone.

Choices: OFF, ON

•Select “OFF” to stop test tones and output the currently selected source component.

•Select “ON” to output test tones from the front left and center speakers, and adjust the tonal quality of the center speaker.

90