8MEMORY (MAN’L/AUTO FM)

Stores a preset station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning (see page 54).

9TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off) (see page 52).

0ZONE 2 ON/OFFTurns on Zone 2 or sets it to the standby mode (see page 106).

Note

This button is operational only when MASTER ON/OFF is pressed inward to the ON position.

AZONE CONTROL

Switches the zone you want to control between the main zone and Zone 2 (see page 106).

y

When Zone 2 is selected, the ZONE2 indicator flashes in the front panel display for approximately 5 seconds. While the indicator is flashing, perform the desired operation.

BVOLUMEControls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.C PHONES (SILENT CINEMA) jackOutputs audio signals for private listening with headphones (see page 40).

Notes

•When you connect headphones, no signals are output at the speaker terminals.

•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

DSPEAKERS A/B

Turns on or off the set of front speakers connected to the FRONT A and/or B terminals on the rear panel each time the corresponding button is pressed.

EPRESET/TUNING, EDIT

•Switches the function of PRESET/TUNING/CH l/ hbetween selecting preset station numbers and selecting the tuning frequency.

•Edits the assignments of preset stations (see page 57).FSTRAIGHT (EFFECT)

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 45).

CONTROLS AND FUNCTIONS

GFM/AM

Switches the reception band between FM and AM when “TUNER” is selected as the input source (see page 52).

HPROGRAM selector

Selects sound field programs or adjusts the bass/treble balance in conjunction with TONE CONTROL (see page 39).

ITONE CONTROL

Adjusts the bass/treble balance of the front left and right, center, presence left and right and subwoofer channels in conjunction with the PROGRAM selector

(see page 39).JINPUT MODE

Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections (see page 41).

KINPUT selectorSelects the desired input source.LMULTI CH INPUT

Selects the component connected to the MULTI CH INPUT jacks as the input source (see page 44).

Note

The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with the INPUT selector on the front panel (or the input selector buttons on the remote control).

MPURE DIRECTTurns on or off the Pure Direct mode (see page 45).NVIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console or a video camera (see page 27).

y

To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

Note

The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.

INTRODUCTION

5