Selecting the OSD mode

You can display the operating information of this unit on a video monitor. If you display the “SET MENU” and sound field program parameter settings on a video monitor, it is much easier to see the available options and parameters than it is to read the information in the front panel display.

1Turn on the video monitor connected to this unit.

2Set the component selector switch to AMP and then press DISPLAY on the remote control repeatedly to toggle between the OSD modes.

The OSD mode changes in the following order.

AMP

SOURCE

DISPLAY

TV

ON SCREEN

Full display

Short display

Display off

Full display

Fully shows the sound field program parameter settings as well as the contents of the front panel display.

Short display

Briefly shows the contents of the front panel display at the bottom of the screen each time you operate this unit.

Display offNo information is displayed except for the “SET MENU” screen.

P02

MUSIC

 

 

.

Pop/Rock

 

 

 

DSP LEVEL;;;;0dB

 

 

 

P.INIT.DLY;;21ms

 

 

 

P.ROOM SIZE;;1.0

 

 

 

S.INIT.DLY;;25ms

 

 

 

S.ROOM SIZE;;1.0

P02

MUSIC

 

 

 

 

 

Pop/Rock

 

Full display

 

Short display

USING VIDEO FEATURES

y

You can display a gray background in the OSD when there is not video signal being input by setting “GRAY BACK” in “OPTION MENU” to “AUTO” (see page 95).

Notes

•The OSD signal is not output at the DVR/VCR OUT jacks and will not be recorded.

•You must set “VIDEO CONV.” in “OPTION MENU” to “ON” (see page 94) to display the OSD.

•To display the OSD with the component video signals output at the COMPONENT VIDEO MONITOR OUT jacks, set the OSD mode to the full display mode.

•When “GRAY BACK” in “OPTION MENU” is set to “OFF” (see page 95), the OSD may not be displayed correctly depending on the conditions of the picture.

Playing video sources in the background

You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor.

Press the input selector buttons on the remote control to select a video source and then an audio source.

 

MD

 

SLEEP

CD

CD-R

XM

Audio sources

 

 

 

 

CBL

 

MULTI CH IN

DVD

DTV

TUNER

 

 

 

 

PHONO

V-AUX

DVR

VCR

Video sources

Note

If you want to enjoy an audio source input at the MULTI CH INPUT jacks together with a video source, first select the video source and then press MULTI CH INPUT on the front panel (or MULTI CH IN on the remote control) to select the component connected to the MULTI CH INPUT jacks as the input source (see page 44).

OPERATION

BASIC

 

 

47