Yamaha RX-V659 1 SOUND MENU, ■Speaker settings A)SPEAKER SET, Press, LARGE, Memory back-up, Front speakers FRONT SP, 5Press u / d repeatedly and then press, Press, Press

SET MENU

5Press u / d repeatedly and then press

ENTER to select and enter the desired submenu.

The following display is an example where “SPEAKER LEVEL” is selected.

	PRESET/CH		PRESET/CH
	ENTER		ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

B)SPEAKER LEVEL

-__________+

.


FL;;;;;;;;;;

FR;;;;;;;;;;

C;;;;;;;;;;

6Press u / d to select the desired parameter and then j / i to change the parameter settings.

•Press ito increase the value.

•Press jto decrease the value.

PRESET/CH			PRESET/CH
ENTER			ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

7Press SET MENU to exit from “SET MENU”.

SET MENU

MENU

SRCH MODE

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is in the standby mode. However, the stored data will be lost in case the power cable is disconnected from the AC wall outlet or if the power supply is cut off for more than one week.

1 SOUND MENU

Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors.

1 SOUND MENU 1/2	1 SOUND MENU 2/2
. A)SPEAKER SET	. E)LFE LEVEL
B)SPEAKER LEVEL	F)DYNAMIC RANGE
C)SP DISTANCE	G)AUDIO SET
D)EQUALIZER
[ ]/[ ]:Up/Down	[ ]/[ ]:Up/Down
[ENTER]:Enter	[ENTER]:Enter

■Speaker settings A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

y

If you are not satisfied with the bass sounds from your speakers, you can change these settings according to your preference.

Front speakers FRONT SP

Choices: SMALL, LARGE

FRONT SP

SMALL
>LARGE

•Select “SMALL” (small) if you have small front speakers that do not reproduce low-frequency signals effectively. The low-frequency signals of the front left and right channels are directed to the speakers selected in “LFE/BASS OUT” (see page 88).

•Select “LARGE” (large) if you have large front speakers that reproduce low-frequency signals effectively. All the front left and right channel signals are directed to the front left and right speakers.

Note

If “LFE/BASS OUT” is set to “FRNT” (see page 88), the LFE signals found in Dolby Digital or DTS sources, the low-frequency signals of the front left and right channels, and the low-frequency signals of other speakers set to “SML” (or “SMALL”) or to “NONE” are all directed to the front left and right speakers regardless of the “FRONT SP” setting.

86