Quick start guide

Notes

•To use the “TV Viewing” template (Case B), you must connect a satellite receiver, a cable TV receiver or an HDTV decoder to this unit in advance. See page 20 for details.

•To use the “Radio Listening” template (Case C), you have to tune into the desired radio station. See pages 50 to 52 for the tuning information.

•To achieve the best possible reception, orient the connected AM loop antenna, or adjust the position of the end of the indoor FM antenna.

y

If you cannot find the desired situation, you can select and change the assigned SCENE template for the SCENE buttons. See page 33 for details.

■After using this unit...

Press AMAIN ZONE ON/OFF to set this unit to the standby mode.

This unit is set to the standby mode and consumes a small amount of power in order to receive infrared signals from the remote control. To turn on this unit from the standby mode, press the desired FSCENE buttons (or

FSCENE) or AMAIN ZONE ON/OFF on the front panel (or HPOWER on the remote control). See page 25

for details.

What do you want to do with this unit?

■Customizing the SCENE templates

• Using various SCENE templates

☞ P. 33

•Creating your original SCENE templates

☞P. 36

■Using various input sources

• Basic controls of this unit

☞ P. 37

• Enjoying FM/AM radio programs

☞ P. 50

•Enjoying XM Satellite Radio programs

☞P. 53

•Using your iPod with this unit.

☞P. 58

■Using various sound features

• Using various sound field programs

☞ P. 42

•Using the pure direct mode for high fidelity sound

☞P. 48

•Customizing the sound field programs

☞P. 61

■Adjusting the parameters of this unit

•Automatically optimizing the speaker parameters for your listening room

(AUTO SETUP)

☞P. 28

•Manually adjusting various parameters of this unit manually

☞P. 71

•Setting the remote control

☞P. 84

•Adjusting the advanced parameters

☞P. 92

■Additional features

Automatically turning off this unit

☞ P. 41

10 En