Advanced sound configurations
You can enjoy good quality sound with the initial factory settings. Although you do not have to change the initial factory settings, you can change some of the parameters to better suit the input source or your listening room.
Note
You cannot change the sound field parameter values when “MEMORY GUARD” in “OPTION MENU” is set to “ON” (see page 82). If you want to change the sound field parameter values, set “MEMORY GUARD” to “OFF”.
1Turn on the video monitor connected to this unit.
2Set the operation mode selector to KAMP and then press ODISPLAY on the remote
control.
The following status screen appears in the OSD.
MOVIE
INPUT:DVD
A.SEL:HDMI
NIGHT:OFF
3Press one of the sound field program selector buttons (P) repeatedly to select the
desired sound field program you want to adjust.
4Press Dk/ nto select the desired sound field parameter and then Dl/ hto change
the selected sound field parameter value.
| PARAMETER |
| |
Cursor |
| MOVIE |
|
| . | 1/2 | |
| |||
PROLOGIC DSP LEVEL;;;;0dB P.INIT.DLY;;16ms
P.ROOM.SIZE;;1.0 S.INIT.DLY;;20ms
[RETURN]:STATUS
y
•For details about the function and control range of each sound field parameter, see page 63.
•When you set a sound field parameter to a value other than the initial factory settings, an asterisk mark (*) appears by the sound field parameter name in the OSD.
•The available sound field parameters for some of the sound field
programs may be displayed on more than one page in the OSD. In this case, press Dk/ nto scroll through pages.
•If you press and hold Dl/ hto change the sound field parameter value, the initial factory settings are shown momentarily in the front panel display.
•Use the “PARAM. INI” feature in “OPTION MENU” to initialize the parameters of each sound field program within a sound field program group (see page 82).
•You can select the amount of time that the current status is displayed in the OSD by using the
5Press ODISPLAY to turn off the sound field parameter display.
OPERATION | ADVANCED |
|
|
English