XM Satellite Radio tuning
Setting the XM Satellite Radio preset channels
You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 55.
1Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on page 54 for details.
[043] XMU
Currently selected channel number
2Press 6MEMORY (or EXM MEMORY).
The MEMORY indicator flashes in the front panel display for approximately 10 seconds.
MEMORY
Flashes
Note
You must proceed to and carry out steps 3 through 5 while the MEMORY indicator is flashing in the front panel display.
3Press 4CATEGORY (or
The preset channel group letter appears in the front panel display.
Flashes
MEMORY
C[043] XMU
Currently selected preset channel group
4Press 5PRESET/TUNING/CH l/ h
(or DPRESET/CH k/ n) repeatedly to select a preset channel number (1 to 8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel display.
Flashes
MEMORY
C5 [043] XMU
Currently selected preset channel number
5Press 6MEMORY (or EXM MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.
A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.
C5:[043] XMU
Colon (:)
Note
Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.