Connections
.
Placing speakersThe speaker layout below shows the speaker setting we recommend. You can use it to enjoy CINEMA DSP and multi- channel audio sources.
PL | PR |
|
| C |
|
FL | FR | PR |
| PL | FR |
|
| |
| FL | SW |
30˚ | SR | |
| C | SBR |
|
| SBL |
SL | SR | SL |
60˚ |
|
|
SL 80˚ | SR |
|
SBL | SBR |
|
1.8 m (6 ft)
30 cm (12 in) or more
Front left and right speakers (FL and FR)
The front speakers are used for the main source sound plus effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each speaker from each side of the video monitor should be the same.
Center speaker (C)
The center speaker is for the center channel sounds (dialog, vocals, etc.). If for some reason it is not practical to use a center speaker, you can do without it. Best results, however, are obtained with the full system.
Surround left and right speakers (SL and SR)
The surround speakers are used for effect and surround sounds.
Surround back left and right speakers (SBL and SBR)
The surround back speakers supplement the surround speakers and provide more realistic
Presence left and right speakers (PL and PR)
The presence speakers supplement the sound from the front speakers with extra ambient effects produced by the sound field programs (see page 42). To use the presence speakers, connect the speakers to EXTRA SP terminals and then set “EXTRA SP ASSIGN” to “PRESENCE” (see pages 29 and 72).
0.5 to 1 m (1 to 3 ft) | 0.5 to 1 m (1 to 3 ft) | ||
| PL | PR |
|
1.8 m (6 ft) | FL | FR | 1.8 m (6 ft) |
C
Subwoofer (SW)
The use of a subwoofer with a