Selecting audio input jacks(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to as the same input source.

y

•We recommend setting the audio input jack select to “AUTO” in most cases.

•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 82).

Press HAUDIO SELECT (or IAUDIO SEL)

repeatedly to select the desired audio input jack select setting.

Available input sources

VCR DVR V-AUX DTV/CBL DVD MD/CD-R TUNER CD XM PHONO

A.SEL:AUTO

Currently selected audio input jack select setting

AUTO

Automatically selects input signals in the

 

following order:(1) HDMI (2) Digital

 

signals (3) Analog signals

 

 

HDMI

Selects only HDMI signals. When HDMI

 

signals are not input, no sound is output.

 

 

COAX/OPT

Automatically selects input signals in the

 

following order: (1) Digital signals input

 

at the COAXIAL jack. (2) Digital signals

 

input at the OPTICAL jack. When no

 

signals are input, no sound is output.

 

 

ANALOG

Selects only analog signals. If no analog

 

signals are input, no sound is output.

 

 

Playback

Displaying the current status of this unit on a video monitor

You can display the operating information of this unit on a video monitor.

1Turn on the video monitor connected to this unit.

2Set the operation mode selector to KAMP and then press ODISPLAY on the remote

control.

The current status screen appears in the OSD.

STATUSVOL:-40.0dB

MOVIE

Sci-Fi



INPUT:DVD

A.SEL:HDMI



NIGHT:OFF





y

You can select the amount of time that the current status is displayed in the OSD by using the “OSD-AMP” parameter in “OPTION MENU” (see page 81).

Note

The OSD signal is not output at the VIDEO output jacks and will not be recorded.

OPERATION

BASIC

 

 

Note

This feature is not available when no digital input jacks (OPTICAL, COAXIAL and HDMI) are assigned. In addition, HDMI is not available as an audio input jack select setting when the HDMI IN 1 and HDMI IN 2 jacks are not used. Use “I/O ASSIGNMENT” in “INPUT MENU” to reassign the respective input jack (see page 78).

English

39 En