Customizing this unit (MANUAL SETUP)

You can use the following parameters in “SET MENU” to adjust a variety of system settings and customize the way this unit operates. Change the initial settings (indicated in bold under each parameter) to reflect the needs of your listening environment.

■Auto setup AUTO SETUP

Use this feature to automatically adjust speaker and system parameters (see page 28).

■Manual setup MANUAL SETUP

Use this feature to manually adjust speaker and system parameters.

Sound menu 1 SOUND MENU

Use this menu to manually adjust any speaker settings, alter the quality and tone of the sound output by the system or compensate for video signal processing delays when using LCD monitors or projectors.

Parameter

Features

Page

 

 

 

 

 

 

 

A)SPEAKER SET

Selects the size of each speaker, the speakers for low-frequency signal output, the crossover

72

 

 

frequency, and the assignment of the EXTRA SP terminal.

 

 

 

 

 

 

 

 

 

 

 

B)SPEAKER LEVEL

Adjusts the output level of each speaker.

74

 

 

 

 

 

 

 

C)SP DISTANCE

Adjusts the distance of each speaker.

75

 

 

 

 

 

 

 

D)EQUALIZER

Adjusts the tonal quality of the center speaker.

75

 

 

 

 

 

 

 

 

 

 

 

 

E)LFE LEVEL

Adjusts the output level of the LFE channel for Dolby Digital or DTS signals.

76

 

ADVANCED OPERATION

 

 

 

 

F)DYNAMIC RANGE

Adjusts the dynamic range of Dolby Digital or DTS signals.

76

 

 

 

 

 

 

 

 

G)AUDIO SET

Adjusts the muting level, audio delay, maximum volume level and initial volume level.

76

 

 

 

 

 

 

 

H)HDMI SET

Selects the component to play back HDMI audio signals.

77

 

 

 

 

 

 

 

 

I)EXTD SUR.

Selects the mode of the decoders for the 6.1/7.1-channel playback.

77

 

 

 

 

 

 

 

Input menu 2 INPUT MENU

Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.

Parameter

Features

Page

 

 

 

A)I/O ASSIGNMENT

Assigns the input/output jacks of this unit according to the component to be used.

78

 

 

 

B)INPUT RENAME

Changes the name of the input source.

79

 

 

 

C)VOLUME TRIM

Adjusts the output volume of each input source.

80

 

 

 

D)DECODER MODE

Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear

80

panel of this unit.

 

 

 

 

 

E)MULTI CH SET

Sets the input channel numbers and other parameters of the multi channel input.

80

 

 

 

English

69 En