6 INPUT RENAME

Use this feature to change the name of the input which appears on the OSD or the front panel display.

1 Press an input selector button (or use INPUT l / h) to select the input you want to change the name of.

2 Press j / i to place the _ (under-bar) under the space or the character you want to edit.

3 Press u/d to select the character you want to use and j / i to move to the next one.

•Press dto change the character in the following order, or press u to go in the reverse order.

A to Z, a space, 0 to 9, a space, a to z, a space, #, *, +, and so on.•Follow the foregoing procedure to rename other inputs.

Note

•You can use up to 8 characters to rename the inputs.4 Press i repeatedly to exit from INPUTRENAME.

7 I/O ASSIGNMENT

Use this feature to designate the input for the COMPONENT jacks (A and B) and the DIGITAL INPUT/OUTPUT jacks (1 to 8) to any sources you want.

■7A [A] [B] (for the COMPONENT VIDEO jacks)Initial settings: [A] DVD[B]D-TV/LD■7B (1) (2) (for the OPTICAL OUTPUT jacks)Initial settings: (1) MD/TAPE(2)CD-R■7C (3) to (6) (for the OPTICAL INPUT jacks)Initial settings: (3) CD(4)CD-R(5)DVD(6)D-TV/LD■7D (7) (8) (for the COAXIAL INPUT jacks)Initial settings: (7) CD(8) CBL/SAT

Note

•You cannot select an item more than once for the same type of jack.

SET MENU

8INPUT MODE (initial input mode)

Use this feature to designate the input mode for sources connected to the DIGITAL INPUT jacks when you turn on this unit (see page 26 for details about the input mode).

Choices: AUTO, LASTInitial setting: AUTOAUTO

Select this to allow this unit to automatically detect the type of input signal and select the appropriate input mode.

LAST

Select this to set this unit to automatically select the last input mode used for that source.

9PARAM. INI (parameter initialization)

Use this feature to initialize the parameters for each DSP program within a DSP program group. When you initialize a DSP program group, all of the parameter values within that group revert to their initial settings.

1 Press DSP.

2 Press the numeric button (DSP program group button) on the remote control for the DSP program you want to initialize.

All of the DSP programs within the selected program group are initialized.

y

•The asterisk mark (*) next to a DSP program group number indicates that you have changed the parameter values in one or more DSP programs within that group.

Notes

•You cannot initialize the individual DSP programs within a group separately.

•The parameter values of the DSP programs do not change if you initialize a program group that does not have the asterisk mark (*).

•When “15 MEMORY GUARD” is set to ON (see page 43), you cannot initialize any program groups.

•Once you initialize a DSP program group, you cannot automatically revert to the previous parameter settings.

OPERATION

ADVANCED

 

 

English

41