Yamaha RX-V800 ZONE, Zone 2 Connections, ZONE 2 (U.S.A., Canada and Australia models only), ■Example of a system configuration and connections

ZONE 2 (U.S.A., Canada and Australia models only)

You can make up a multi-room audio system with this unit. You can enjoy an audio source selected with INPUT l / h (or input selector buttons) in the second room (Zone 2).

Only analog signals are sent to the second room. For any source you want to listen to in the second room, you must connect the analog output jack from the source to the corresponding analog input jack on this unit.

Zone 2 Connections

To use the multi-room functions of this unit, you need the following additional equipment:

•An infrared signal receiver in the second room•An infrared emitter in the main room

This emitter transmits the infrared signals from the remote control in the second room to the main room (for example, to a CD player).

•An amplifier and speakers for the second room

OUT	IN	OUT	IN		REMOTE
				CONTROL OUT

This unit

y

•Since there are so many ways to connect and use this unit in a multi-room installation, we recommend that you consult with the nearest authorized YAMAHA dealer or service center for the zone 2 connections which will best meet your requirements.

•Some YAMAHA models are able to connect directly to the REMOTE CONTROL OUT jack of this unit. If you own these products, you may not need to use an infrared emitter.

■Example of a system configuration and connections

		ZONE 2 AUDIO OUT
Main room		Second room
		Amplifier
CD player	This unit	Infrared signal
(or other component)		receiver
		Remote control
Infrared emitter

REMOTE CONTROL OUT REMOTE CONTROL IN

Notes

•When not using the main room, turn down the volume of this unit in the main room. Adjust the Zone 2 volume with the control on the amplifier in the second room.

•DO NOT USE the Zone 2 feature for CDs encoded with DTS.

54