TROUBLESHOOTING

 

 

 

 

Problem

Cause

Remedy

Refer to

page

 

 

 

 

No sound from the

The sound effect is off.

Press EFFECT to turn it on.

29

effect speakers.

 

 

 

A Dolby Surround, Dolby Digital or DTS

Select another DSP program.

55 – 58

 

 

decoding DSP program is being used with

 

 

 

material not encoded with Dolby Surround,

 

 

 

Dolby Digital or DTS.

 

 

 

 

 

 

 

A 96-kHz sampling digital signal is being

 

25

 

input to this unit.

 

 

 

 

 

 

No sound from the

The output level of the center speaker is set

Raise the level of the center speaker.

44

center speaker.

to minimum.

 

 

 

 

 

 

 

“1A CENTER SP” on the SET MENU is

Select the appropriate mode for your center

37

 

set to NONE.

speaker.

 

 

 

 

 

 

One of the Hi-Fi DSP programs (1 to 5)

Select another DSP program.

55 – 58

 

has been selected.

 

 

 

 

 

 

 

The source encoded with a Dolby Digital

 

—

 

or DTS signal does not have a center

 

 

 

channel signal.

 

 

 

 

 

 

No sound from the

The output level of the rear speakers is set

Raise the output level of the rear speakers.

44

rear speakers.

to minimum.

 

 

 

 

 

 

 

A monaural source is being played with the

Select another DSP program.

55 – 58

 

program 10.

 

 

 

 

 

 

No sound from the

“1D LFE/BASS OUT” on the SET MENU

Select SWFR or BOTH.

39

subwoofer.

is set to MAIN when a Dolby Digital or

 

 

 

DTS signal is being played.

 

 

 

 

 

 

 

“1D LFE/BASS OUT” on the SET MENU

Select BOTH.

39

 

is set to SWFR or MAIN when a 2-channel

 

 

 

source is being played.

 

 

 

 

 

 

 

The source does not contain low bass

 

—

 

signals (90 Hz and below).

 

 

 

 

 

 

Poor bass

“1D LFE/BASS OUT” on the SET MENU

Select MAIN.

39

reproduction.

is set to SWFR or BOTH and your system

 

 

 

does not include a subwoofer.

 

 

 

The output mode for each speaker (main,

Select the appropriate output mode for each

37, 38

 

center or rear) on the SET MENU does not

speaker based on the size of the speakers in

 

 

match your speaker configuration.

your configuration.

 

 

 

 

 

A “humming” sound

Incorrect cable connections.

Firmly connect the audio plugs. If the

12 – 15

can be heard.

 

problem persists, the cables may be

 

 

 

defective.

 

 

 

 

 

 

No connection from the turntable to the

Connect the grounding cord of your

12, 13

 

GND terminal.

turntable to the GND terminal of this unit.

 

 

 

 

 

The volume level is

The record is being played on a

The turntable should be connected to the unit

12

low while playing a

turntable with an MC cartridge.

through an MC-head amplifier.

 

record.

 

 

 

 

 

 

 

APPENDIX

English

67