Manuals / Brands / Home Audio / Stereo Receiver / Yamaha / Home Audio / Stereo Receiver

Yamaha RXV3000 :FM, A :FM, Automatic Tuning, ■ For manual tuning, Tuning to Preset Stations

1 80

Download 80 pages, 7.7 Mb

AM/FM Tuner

Automatic Tuning

1Select “TUNER” as the input source.

You can use the INPUT selector on the main unit or the input button on the remote control.

FM/AM

FM or AM

TUNING

MODE

AUTO

AUTO/NAN'L MONO

2Press AM/FM to select the reception band. “FM” or “AM” appears in the display.

3Press TUNING MODE so that the AUTO tuning indicator appears in the display.

If the colon (:) appears in the display next to the AM or FM indicator, press

PRESET/TUNING to turn it off.

Basic Operation

Turn this indicator off.		4 Turn the Multi jog knob clockwise or counterclockwise to start automatic
		tuning.

A	:FM 89.	Turn the Multi jog knob clockwise to tune to a higher frequency or

		counterclockwise to tune to a lower frequency.
		counterclockwise to tune to a lower frequency.
		Use manual tuning if the tuning search does not stop at the correct station
		because the signals are weak.

■ For manual tuning

1 Press TUNING MODE so that the AUTO tuning indicator goes off in the display.

If the colon (:) appears in the display next to the AM or FM indicator, press

PRESET/TUNING to turn it off.

2 Turn the Multi jog knob clockwise or counterclockwise to tune to the desired station manually.

Hold on the knob to continue the tuning search.

Automatic tuning is effective when the radio signals are strong and have no interference. However, manual tuning is best for weaker signals that have some interference.

Note:

•Manually selecting an FM station will automatically change the reception to monaural to increase the signal quality.

Tuning to Preset Stations

	PRESET		1 Press PRESET/TUNING so that the colon (:) appears next to the AM or FM
	/TUNING	A :FM
	/TUNING		indicator.
			indicator.
	EDIT		The colon (:) must appear in the display to recall preset stations. If necessary,


			press PRESET/TUNING again.

2Turn the Multi jog knob clockwise or counterclockwise to select the desired preset station number.

The preset number appears in the display along with the band, frequency and signal strength information.

A1— A2	A8— B1
E8— E7	C1— B8

30

Contents

Natural Sound AV Receiver Ampli-Tuner Audio-Video Page FCC INFORMATION (for US customers only) We Want You Listening For A Lifetime Page Contents Introduction Preparations Basic Operation Advanced Operation Introduction Getting Started Controls and Functions Getting Started Checking the Package Contents Installing Batteries in the Remote Control Using the Remote Control ■About changing batteries Controls and Functions Front Panel 10 q w e 7r9 7 689 0 q weru i y t o qTREBLE wREC OUT/ZONE eEFFECT tVIDEO AUX yFM/AM Rear panel 2 e q 8t 1Audio component jacks 2Video component jacks Remote Control 9 Operational buttons 0 Sound program selector/Numeric buttons q MUTE w VOLUME +/– Preparations Speaker System Configurations Hookups On-ScreenDisplays (OSD) Speaker Placement Speaker System Configurations ■Eight or Seven Speaker Configuration –FullCinema DSP– ■Six Speaker Configuration –HiFi DSP– ■Five Speaker Configuration –Standard5.1 Channel– ■Four Speaker Configuration –MinimumRequirement– Hookups Connecting Audio Components ■Connecting to digital jacks ■About the dust protection cap ■Connecting a turntable Page Connecting Video Components ■About the video jacks Page Connecting Speakers ■Using speaker cords About the (AC-3) signal input jack Page Connecting Subwoofers ■ Connecting a front subwoofer ■Connecting a rear subwoofer Connecting an External Decoder Connecting External Amplifiers q FRONT jacks r CENTER jack w REAR (Surround) jacks Others WARNING ■IMPEDANCE SELECTOR switch ■Connecting the AC power cord ■AC OUTLETS On-ScreenDisplays (OSD) OSD Modes P01 CONCERT HALL Selecting the OSD Mode Speaker Placement ■ Placing the Main speakers ■Placing the Center speaker ■Placing the Front Effect, Rear, and Rear Center speakers ■When you use a projection screen Speaker Settings Summary of SPEAKER SET items 1A through 1G EFFECT LEVEL L SUR 0dB TEST DSP MAIN EFFECT LEVEL FRONT 0dB Basic Operation Basic Playback AM/FM Tuner Basic Recording Basic Playback Power Control Selecting a Source ■BGV (Back Ground Video) function AUTO:DOLBY D AUTO:DTS AUTO:PCM AUTO:ANALOG AUTO: EFFECT OFF AM/FM Tuner Connecting the Antennas AM loop antenna (included) ■Connecting the indoor FM antenna ■Optional outdoor FM/AM antenna ■Connecting the AM loop antenna :FM A :FM A-1:FM89.0 MHz STEREO AUTO A-1:FM89.0 MHz E-1:FM A-5:FM EDIT Basic Recording Preparations ■Special considerations when recording DTS software Advanced Operation SET MENU Items Remote Control Features ZONE Adjusting the Levels of the Effect Speakers SET MENU Items Operating the SET MENU SET MENU 1/4 1. SPEAKER SET (1A. CENTER SP to 1G. MAIN LEVEL) ■1A. CENTER SP (Center Speaker Mode) 1A CENTER SP ■1B. MAIN SP (Main Speaker Mode) 1B MAIN SP 1E LFE/BASS OUT 1F FRNT EFCT SP 1G MAIN LEVEL 4 HP TONE CTRL 7. I/O ASSIGN ■7A. For the ■ 7B. For the ■7C. For the ■7D. For the 10. DOLBY D. SET (Dolby Digital Set) 10A LFE LEVEL ■10A. LFE LEVEL 10B D-RANGE 11. DTS SET 13. SP DELAY TIME 13 SP DELAY TIME 14. DISPLAY SET ■ BLUE BACK > AUTO/OFF ■ OSD SHIFT Remote Control Features <Main Unit Control Area <Component Control Area ■SOURCE SELECT ■About OPTN ■Light up function Each Component Control Area ■ TUNER button (Tuner area) ■CD button (CD area) ■ MD/TAPE button (MD area*1) ■CD-Rbutton (CD-Rarea) ■PHONO and V-AUXbuttons, and OPTN area*2 ■DVD button (DVD area) ■D-TV/LDbutton (TV area*3) ■VCR1 and VCR2/DVR button (VCR areas*4) ■CABLE and SAT buttons (CABLE and SAT areas*5) ■Å button (ex. LD area*6) Setting the Manufacturer Code in the Remote Control About amplifier libraries (L:AMP) Programming a New Remote Control Function Using the Macro Feature ■Operating the Macro feature ■Programming a Macro Changing the Source Name in the Display Window Clearing a Learned Function or Macro Clearing Learned Functions and Setups ZONE Connections ■A sample of system configuration and connections ■Special considerations when using DTS software For DTS encoded LDs or DVDs Remote Control in Zone Adjusting the Levels of the Effect Speakers Setting the Sleep Timer ■ To set the sleep timer ■To cancel the sleep timer Additional Information Digital Sound Field Processing (DSP) CINEMA-DSP DSP Parameter Digital Sound Field Processing (DSP) Understanding Sound Fields ■Recreating a sound field ■E/R (Early Reflection) ■4ch REV. (Four Channel Reverberation) Hi-FiDSP Programs ■ Europe Hall A ■Europe Hall B ■ U.S.A. Hall C ■Live Concert CINEMA-DSP Sound Design of CINEMA-DSP ■Movie theater programs Dolby Pro Logic + DSP sound field effect Dolby Digital/DTS + DSP sound field effect CINEMA-DSPPrograms Table of Program Names for Each Input Format ■Program groups 7 (Game)~9 ■Program groups 10~12 ■Game Concert Video ■Classical/Opera ■Pop/Rock TV Theater DSP Parameter Changing Parameter Settings Parameter Descriptions INIT. DLY (Initial Delay) P. INT. DLY ROOM SIZE P. ROOM SIZE LIVENESS S. DELAY (Surround Delay) S. INIT. DLY (Surround Initial Delay) S. LIVENESS (Surround Liveness) RC. INIT. DLY (Rear Center Initial Delay) RC. ROOM SIZE (Rear Center Room Size) RC. LIVENESS (Rear Center Liveness) REV. TIME (Reverberation Time) REV. LEVEL (Reverberation Level) CT. DELAY (Center Delay) LS. DELAY (Left Surround Delay) RC. DELAY (Rear Center Delay) RS. DELAY (Right Surround Delay) Appendix Troubleshooting Specifications Troubleshooting Page Tuner Remote Control Specifications Audio Section Video Section FM Section AM Section Page Quick Reference Card ■ Remote Control ■ TUNER button (TUNER area) ■ CD button (CD area) ■MD/TAPE button (MD area) button (TV area) ■A button (ex. LD area)