SET MENU Items

13. SP DELAY TIME
13 SP DELAY TIME

￿￿CENTER………………0ms

 

REAR CNTR………3ms

13 SP DLY TIME

 

CENTER………………0ms

14. DISPLAY SET

Use this feature to adjust the delay of the Center and the Rear Center channel sounds. This feature works when this unit decodes DTS or Dolby Digital signals. Ideally, the Center speaker and the Rear Center speaker should be the same distance from the main listening position as the left and right Main speakers. However, in most home situations, the Center speaker or the Rear Center speaker is placed in line with the Main speakers or the Rear speakers. By delaying the sound from the Center speaker and the Rear Center speaker, the apparent distance from the Center speaker and the Rear Center speaker to the main listening position can be adjusted to make it seem the same as the distance between the left and right Main speaker, and the left and right Rear speakers to the listening position. Adjusting the delay time for the Center speaker is especially important for giving depth to the dialogue.

You can adjust the delay time from 0 ms to 5 ms for the Center speaker and from 0 ms to 30 ms for the Rear Center speaker.

•Increasing the delay 1 ms simulates moving the speakers about 30 cm (one foot) farther away from the listening position.

English

14 DISPLAY SET

 

■ BLUE BACK > AUTO/OFF

 

 

￿￿BLUE BACK………AUTO

 

You can set the OSD background to blue if the video source is not being

OSD SHIFT………………0

14 DISPLAY SET

reproduced (or the power of the source component is off).

DIMMER………………………0

BLUE BACK……AUTO

 

 

 

 

■ OSD SHIFT

 

 

This setting is used to adjust the vertical position of the OSD.

 

 

■ DIMMER

 

 

You can adjust the brightness of the front panel display.

15. MEMORY GUARD

15 MEMORY GUARD

 

Use this feature to prevent accidental changes to DSP program parameter values and

 

other settings on this unit.

>OFF ON

 

 

 

 

15 MEMORY GUARD

Select “ON” to use MEMORY GUARD to protect the following features:

 

“OFF

ON

 

•DSP program parameters

•All SET MENU items

•Front, Rear Center speaker and Subwoofer levels

•The On-Screen Display mode

Notes:

•When MEMORY GUARD is “ON”, you cannot use any of the test modes.

•When MEMORY GUARD is “ON”, you cannot select any other SET MENU item.

16. ZONE 2 SET
16 ZONE2 SET

Select ZONE2 OUT to change the setting of the ZONE 2 output volume.

FIXED VAR.

Select “FIXED” when you don’t want to change the volume of output to

 

16 ZONE2 SET

ZONE 2 with the remote control.

 

“FIXED VAR.

 

Selecting “VAR.” allows you to control the volume output to ZONE 2 with the remote control.

43