qTREBLE

Adjusts the high frequency response for the left and right Main channels. Turn the control to the right to increase the high frequency response.

wREC OUT/ZONE 2

Selects the source you want to direct to the audio/video recorder.

eEFFECT

Switches the effect speakers (Center, Front Effect, Rear and Rear Center) on and off. If you turn off the output of these speakers using EFFECT, all DTS and Dolby Digital audio signals are directed to the Main left and right channels except for the LFE channel.

Controls and Functions

tVIDEO AUX

Inputs audio and video signals from a portable external source such as a video camera. To reproduce source signals from these jacks, select V-AUX as the input source. To direct this source to the VCR 1 and VCR 2/DVR output jacks, select VIDEO AUX using REC OUT.

yFM/AM

Switches the reception band between FM and AM.

uMulti jog knob

Selects the tuning frequency in the tuning mode.

Selects the preset station after pressing PRESET/TUNING to display a colon (:) in the tuning mode.

Selects the DSP program after pressing DSP PROGRAM.

English

r6CH INPUT

Switches between 6CH INPUT mode and normal input modes. 6CH INPUT mode takes priority over the source selected with the INPUT selector. You cannot use DSP sound field programs while using an external decoder.

iMEMORY (MAN’L/AUTO FM)

Stores a station in the memory.

oTUNING MODE (AUTO/MAN’L MONO)

Switches the tuning mode between automatic and manual. To select the automatic tuning mode, press this button so that the AUTO tuning indicator appears in the front panel display (the STEREO indicator also appears if receiving a stereo broadcast). To select the manual tuning mode, press this button so that the AUTO tuning indicator does not appear.

Display Indicators1Processor indicators

When any function of DTS/VIRTUAL/Dolby Digital/Dolby PROLOGIC/DSP/Dolby Digital Matrix 6.1/DTS ES is operating, its indicator lights up.

2PCM

Lights up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals.

3SPEAKERS A/B

Lights up according to which set of Main speakers is selected. Both indicators light up when both sets of speakers are selected.

4Headphones

Lights up when headphones are connected.

5Multi-information display

Shows the current DSP program and other information when adjusting or changing settings.

6Input source

Shows the current input source with the arrow-shaped cursor.

7BASS

Lights up while the BASS EXTENSION is on.

8SLEEP

Lights up while the Sleep Timer is on.

9P. DIRECT

Lights up while the PROCESSOR DIRECT is on.

0STEREO

Lights up when the AUTO tuning indicator is on and the unit is receiving a strong signal for an FM stereo broadcast.

qMEMORY

Flashes to show a station can be saved.

wTUNED

Lights up when this unit tunes into a station.

eAUTO

Shows that the Tuner is in Automatic tuning mode.

rZONE 2

Lights up when you select the input source while the remote control is in the Zone 2 mode.

5