You can adjust the volume level of each effect speaker (Center, Right Rear, Rear Center, Left Rear, Front Effect, and Subwoofer) while listening to a music source.
1 Set PARAMETER/SET MENU to PARAMETER.
2 Press LEVEL to select the speaker(s) you want to adjust.
Each time you press this button the selected speaker changes and appears in the front panel display only as follows: Center, Right Rear, Rear Center, Left Rear, Front Effect speakers, and Subwoofer
English
Center
|
| EFFECT | LEVEL | |
|
| CENTER | 0dB | |
| Right Rear |
|
| |
|
|
|
|
|
|
| EFFECT | LEVEL | |
|
| R SUR. | 0dB | |
| Rear Center |
|
| |
|
|
| ||
|
|
|
|
|
|
| EFFECT | LEVEL | |
|
| REAR CT | 0dB | |
| Left Rear |
|
| |
|
|
|
|
|
|
| EFFECT | LEVEL | |
|
| L SUR. | 0dB | |
| Front |
|
| |
|
|
| ||
|
|
|
|
|
|
| EFFECT | LEVEL | |
|
| FRONT | 0dB | |
| Subwoofer |
|
| |
|
|
|
|
|
|
| EFFECT | LEVEL | |
|
| SWFR | 0dB | |
|
|
|
|
|
3Adjust the speaker volume level using the + or
You can adjust the Center, Right Rear, Rear Center, Left Rear, Front Effect speakers from +10 dB to
You can adjust the Subwoofer from 0 dB down to
Notes:
•You cannot adjust the left and right speakers independently.
•When you adjust the speaker level using LEVEL, the settings you made using the Dolby Surround Test and DSP Test change.
•When PARAMETER/SET MENU is set to SET MENU, you cannot adjust the speaker level using LEVEL. However, each time you press LEVEL the current level setting of each speaker appears. Select the speaker level you want to check using h or g.
•When the headphones are connected to this unit, the levels of the effect speakers cannot be adjusted.
Use this feature to automatically turn off the main unit after the amount of time you set. The Sleep Timer is useful when you plan to fall asleep while the main unit is reproducing or recording a source. The Sleep Timer also automatically turns off external components connected to AC OUTLETS. The Sleep Timer can only be set using the remote control.
■ To set the sleep timer1 Select a source using the INPUT selector and start playback (or select a broadcast station) on the source component.
2 Press SLEEP repeatedly to set the amount of time before the main unit automatically turns off.
Each time you press SLEEP, the front panel display changes as shown below.
After a few seconds the display returns to the previous indication.
SLEEP 120 min 
SLEEP 90 min
SLEEP OFF 
SLEEP 30 min 
SLEEP 60 min 
1Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display.
After a few seconds, the display returns to the previous indication.
Note:
•The Sleep Timer setting can also be canceled by turning off the main unit using STANDBY on the remote control (or STANDBY/ON on the front panel) or by disconnecting the AC Power Cord from the AC outlet.
57