Yamaha VS-10 owner manual Operating The Unit, Enjoying the Home Theater Sound System, English

OPERATION

OPERATING THE UNIT

Enjoying the Home Theater Sound System

This section describes how to select the input source to enjoy the sound from a TV, VCR, DVD player, satellite tuner or video game player with the VS-10 and to adjust the volume.

First turn on the power of the playback component and the TV, and then follow the steps described below.

1			2			3
						1
	POWER					3
		STANDBY
DIGITAL2	VIDEO2	PHONES	INPUT	DSP	VOLUME
			SILENT

ON/OFF

EFFECT

VS10 TV VCR CBL

CH

– VOL VOL +

CH

	SET		2
MUTE	DSP	AV
	MEMORY

1 2 3

OPERATION

1 Press POWER on the control center and press p on the remote control to turn on the power.

	When the
	STANDBY indicator
Front panel	lights or flashes.	Remote control

•When the STANDBY indicator lights or flashes, the power can be turned on using p on the remote control. The power also can be turned on by pressing the INPUT selector button on the control center.

•The VS-10 memorizes the last state when the power is turned off. If you turn off the power using POWER on the control center in standby mode (when the STANDBY indicator lights), the unit enters standby mode when you press POWER on the control center next time.

If you turn off the power using POWER on the control center when the power is turned on (when the STANDBY indicator does not light), the power is turned on when you press POWER on the control center next time.

3 Adjust the level using VOLUME B/N (or VOL +/–on the remote control).

Pressing VOLUME B (or VOL + on the remote control) increases the level, while pressing VOLUME N (or VOL –on the remote control) decreases the level.

or

Front panel Remote control

CAUTION

When the “ TV” , “ VCR” or “ CBL” button on the remote control is pressed to control another unit, the remote control can not control the VS-10. In this case, press the

“VS10” button on the remote control and operate the VS-10.

2 Press the INPUT or AV selector button.

Each time the button is pressed, the input is switched in the order: VIDEO 1 → TV → VIDEO 2 → DIGITAL 1

→DIGITAL 2.

or

AV

Front panel Remote control

English

17