Yamaha VS-10 Using Convenient Functions, Enhancing the bass tones, Adjusting the subwoofer level

USING CONVENIENT FUNCTIONS

You can use convenient functions with the remote control during a playback.

ON/OFF

EFFECT

VS10 TV VCR CBL

	CH
– VOL	VOL +
	CH

D		SET
	MUTE	DSP	AV
		MEMORY
E	1	2	3
	4	5	6
	7	8	9
	–	MENU	+
		0
	LAST		ENTER
(When the subwoofer	SUBWOOFER		SUBWOOFER
C
is connected.)	–	TEST	+

B NIGHT MODE

A

ÅEnhancing the bass tones

Press t.

•The TRUBASS* indicator lights in the display.

•This function enhances the bass tones by increasing the level of the low-range frequencies. When the SW-VS10 is connected, the bass tones of the subwoofer are also enhanced.

To cancel TRUBASS mode, press tagain.

Notes

•The TRUBASS mode does not function when the headphones are connected.

•If a thudding noise is heard from the subwoofer when this function is turned on, lower the subwoofer level. Otherwise, the subwoofer may be damaged due to an excessive input level of low-bass signal.

*

TruBass and the symbol are trademarks of SRS Labs, Inc. in the United States and selected foreign countries. TruBass technology is incorporated under license from SRS Labs, Inc.

ıListening to sound clearly at low levels

Press NIGHT MODE.

•Sounds become clear.

•Use this function when it is difficult to output high volumes such as late at night.

To cancel NIGHT MODE, press NIGHT MODE again.

Notes

•The NIGHT MODE does not function when the headphones are connected.

•Volume cannot be decreased using this button. To decrease the volume, press VOLUME N (or VOL –on the remote control).

ÇAdjusting the subwoofer level

Subwoofer level can be adjusted when a subwoofer is connected.

Pressing SUBWOOFER + increases the level, while pressing SUBWOOFER –decreases the level.

y

• The level can be adjusted within the range –20 dB to +10 dB.

Note

•If a thudding noise is heard from the subwoofer when the TRUBASS function is turned on or when you play a bass- enhanced source such as 5.1 channel Dolby Digital or DTS which contains Low Frequency Effect, lower the subwoofer level. Otherwise, the subwoofer may be damaged due to an excessive input level of low-bass signal.

ÎMuting the sound temporarily

Press MUTE.

MUTE

y

• “Mute ON” is displayed when the sound is muted.

To return to the original volume level, press MUTE again. Pressing VOL+/–also cancels the muting mode and adjusts the volume level.

OPERATION

English

19