Yamaha VS-10 Connecting the Main Speakers, Preparation, Open the tab, Cautions, English

CONNECTIONS

Connecting the Main Speakers

Connect the main speakers to the control center.

Note

•Do not connect any speakers to the speaker terminals on the control center except for the supplied main speakers (NX-VS10M). Damage may result if a different speaker is connected.

Right main speaker (Rear panel) Left main speaker (Rear panel)

PREPARATION

Bare wire

2

3

1 – – +

Tab

DO NOT CONNECT THIS UNIT TO

SPEAKERS OTHER THAN NX-VS10M

MAIN SPEAKERS

Control center (Rear panel)

		VIDEO SIGNAL
		MONITOR
		OUT
		+	–	–	+
		DO NOT CONNECT THIS UNIT TO			MARK
		SPEAKERS OTHER THAN NX-VS10M
		MAIN SPEAKERS
DIGITAL 1	VIDEO 1	TV	OUT		SYSTEM
			SUBWOOFER		CONNECTOR
(V/PCM)
INPUT

1 Open the tab.

2 Insert the bare wire of the speaker cord into the hole.

3 Return the tab until it clicks.

•Connect the white cord to the + terminal (red), and the black cord to the –terminal (black).

•Once connected, pull gently on the speaker cords to check that they are connected securely.

UNSWITCED

0.8A MAX. 120V 60Hz 100W MAX.

AC OUTLET

CAUTIONS

•Do not let the bare speaker wire touch each other and do not let them touch any metal part of the speakers. This could damage the speakers.

•Do not mistakenly connect positive (+) to negative (–) or vice versa when connecting speaker cords.

•Insert the speaker cords securely so that positive (+) and negative (–) do not short. The speaker may not output any sound or may output noise, causing damage to the speakers, if speaker cords are not inserted securely.

•Only insert the bare wire portion of the speaker cords into the holes. Sound will not be output if you insert as far as the plastic insulation part of the cord.

•Secure the speaker cords so that they will not catch on hands or feet.

English

13