Yamaha VS-10 Specifications, Control Center, Main Speakers, General, Appendix, English

SPECIFICATIONS

Control Center

■Amplifier Section Minimum RMS Output Power

Main	.......................... 25 W + 25 W (1 kHz, 10% THD, 6 ohms)
Signal-to-Noise Ratio		90 dB (VIDEO 1, IHF-A)
Total Harmonic Distortion
.......................	0.07% (Input: VIDEO 1, 1 kHz, 10 W/6 ohms)
Input Sensitivity/Impedance		VIDEO 1, 200 mV/50 k-ohms

■Video Section

Video Signal Level .................................................. 1 Vp-p/75 ohms

Main Speakers

Type	2 way Bass-Reflex
Speakers	10-cm cone, magnetically shielded
	2 cm Super Tweeter
Maximum Input Power	25 W
Impedance	6 ohms

General

Power Supply
[Europe and U.K. models]	AC 230 V, 50 Hz
[U.S.A. and Canada models]	AC 120 V, 60 Hz
[Australia model]	AC 240 V, 50 Hz
Power Consumption	60 W
Power Consumption (standby mode)	5.5 W
Dimensions (W x H x D)
Control center	302 x 82 x 300 mm
When installing vertically (including the supporting stand and
side pads)	124 x 302.5 x 300 mm
When installing horizontally (including the bottom pads)
................................................................	302 x 88.5 x 300 mm
Main speaker	125 x 185 x 145 mm
Weight
Control center	4.7 kg
Main speaker	1.4 kg
Accessories	Remote control
	UM-4 batteries (x 4)

Audio connection cord (2 pin, 1.5 m)

Video connection cord (1.5 m)

Supporting stand (x 1)

Bottom pads (x 4)

Side pads (x 2)

Connection guide

Specifications are subject to change without notice.

APPENDIX

English

33