Yamaha VS-10 Names Of All Parts, Display, Control Center Front Panel, STANDBY indicator

	NAMES OF ALL PARTS
Control Center (Front Panel)
POWER (page 17)	STANDBY indicator
Turns the power of the control
center on and off. This button	When this indicator lights up,		DSP selector button (page 22)
also turns off the subwoofer’s	this unit consumes a very
power when the YAMAHA NX-	small quantity of power to		INPUT selector
SW10 (sold separately) is	receive infrared-signals from
connected. The STANDBY	the remote control.		button (page 17) VOLUME N/B (page 17)
indicator lights when power is
turned off using pon the
remote control.
		POWER
		STANDBY
	DIGITAL2	VIDEO2	INPUT	DSP	VOLUME
		PHONES

DIGITAL 2 optical	SILENT
digital input terminal
DIGITAL 2 / VIDEO 2
video input terminal			POWER
	VIDEO 2 audio input
	terminals
		OPEN	NATURAL SOUND HOME THE
	PHONES jack
	Used to connect the headphones.
	No sound can be heard from the	To open the front door
	speakers when the headphones are
	connected.	Press downward “ OPEN” on the left
		bottom of the front door. When the
		parts inside the front door are not used,
		put the front door back.

Display

As the display becomes brighter for a few seconds each time this unit is operated, you can check the current operation clearly.

Processing indicators (page 23)	VIRTUAL indicator	Phones indicator
		Lights when the headphones are connected.

EFFECT OFF indicator	TRUBASS indicator (page 19) Shows the various information such as DSP
Lights when the sound field	program name, level or operational status
effects is not turned on.

4