Features and functions

“Selecting the normal mode/low-RPM mode” Low-RPM mode

for operation mode information.)

If the beeper sounds three times, the low-

 

RPM mode is activated and the “L-MODE” in-

 

dicator light comes on.

1Unlock button

Number

Yamaha Security Sys-

Engine

can be

of beeps

tem mode

started

 

 

 

 

 

1 beep

Lock

NO

 

 

 

2 beeps

Unlock

YES

(normal mode)

 

 

 

 

 

3 beeps

Unlock

YES

(low-RPM mode)

 

 

 

 

 

EJU31411

Selecting the normal mode/low-RPM mode (for VX Deluxe/VX Cruiser)

The normal mode and low-RPM mode can only be selected when the engine is stopped in the unlock mode. Press the unlock button on the remote control transmitter for more than 4 seconds to switch between the normal mode and the low-RPM mode.

Normal mode

If the beeper sounds twice, the normal mode is activated.

The watercraft can be ridden normally.

1“L-MODE” indicator light

Maximum engine speed (r/min) in the low- RPM mode is limited to approximately 90% of the maximum engine speed in the normal mode.

NOTE:

●If neither the start switch nor the remote control transmitter is operated within 25 seconds after the unlock button is pressed to select the unlock mode, the multifunction meter display and the “L-MODE” indicator light will go off. If this occurs, press the lock button on the transmitter briefly to select the lock mode, press the unlock button briefly to select the unlock mode, and then press the unlock button again for more than 4 sec- onds to select the normal mode or low-RPM mode.

●While the engine is running, input from the remote control transmitter is not received.

ECJ00080

CAUTION:

If the remote control transmitter does not operate when its buttons are pressed, the battery may be low. Have a Yamaha dealer replace the battery.

35