Features and functions
sure warning indicator begin to blink, and the buzzer sounds intermittently. At the same time, the engine speed is limited to help prevent damage.
If this occurs, reduce the engine speed, return to shore, and then check the engine oil level. (See page 47 for engine oil level checking procedures.) If the oil level is low, add enough engine oil to raise it to the proper level. If the oil level is sufficient, have a Yamaha dealer check the watercraft.
NOTE:
Press the select button on the multifunction meter to stop the buzzer.
dicator blink, and then come on. The buzzer also begins to sound intermittently, and then it sounds continuously. After the light and indicator start to blink and the buzzer sounds, the engine speed is limited to help prevent dam- age.
If this occurs, immediately reduce the engine speed, return to shore, and then check for water discharge at the port (left) cooling water pilot outlet while the engine is running. If there is no discharge of water, shut the engine off, and then check the intake grate and impeller for clogging.
1Select button
EJU31602
Engine overheat warning indicator
This model is equipped with an engine overheat warning system.
If the engine starts to overheat, the “WARNING ” light and the engine overheat warning in-
EWJ00050
WARNING
Before attempting to remove weeds or debris from the intake grate or impeller, shut the engine off and remove the clip from the engine
38