Operation
EJU32740
Operation
EWJ00510
WARNING
Before operating your watercraft, become familiar with all of the controls. Consult a Yamaha dealer about any control or function that you do not fully understand. Failure to understand how the controls work could cause an accident or prevent you from avoiding an accident.
ECJ00460
CAUTION:
Make sure that the stern drain plugs are tightened securely before launching the watercraft.
EJU32781
Engine break-in
The engine
ECJ00440
CAUTION:
Be sure to check the engine oil level before operating the watercraft for the first time. (See page 47 for engine oil checking procedures.)
(1)Launch the watercraft and start the en- gine. (See page 54 for engine starting procedures.)
(2)For the first 5 minutes, run the engine at trolling speed only. For the 30 minutes of operation after that, keep the engine speed below 5000 r/min. For the 1 hour of operation after that, keep the engine speed below 6500 r/min.
(3)Proceed with normal operation.
ECJ00430
CAUTION:
Failure to follow the engine
EJU32811
Launching the watercraft
When launching the watercraft, make sure that there are no obstacles around you.
If there are waves, someone should make sure that the watercraft is not pushed into the trailer after launching the watercraft.
●For VX Deluxe/VX Cruiser:
Use the remote control transmitter to select the unlock mode. (See page 34 for Yamaha Security System and
After the watercraft is in the water, start the engine. Shift into reverse and move the wa- tercraft back slowly.
●For VX/VX Sport:
After the watercraft is in the water, turn it around so that the bow faces the direction you wish to go. Start the engine, and then
slowly move away from the launching area.
EJU32850
Starting the engine
EWJ00560
WARNING
Never start the engine or let it run for any length of time in an enclosed area. Exhaust fumes contain carbon monoxide, a
54