E

UP

DN

EMU01563

POWER TRIM/TILT SWITCH

The power trim/tilt adjusts the motor angle in relation to the transom. The power trim/tilt switch is located on the side of the bottom engine cowling. Pushing the switch “UP” trims the motor up, then tilts the motor up. Pressing the

302022 switch “DN” tilts the motor down and trims the motor down. When the switch button is released, the motor will stop in its current position.

w

Use the power trim/tilt switch located on the bottom engine cowling only when the boat is at a complete stop with the engine off. Attempting to use the cowling -mounted power trim/tilt switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of collision with another boat or an obstacle.

NOTE:

Refer to the sections “ADJUSTING TRIM ANGLE” and “TILTING UP/DOWN” for instructions on usage.

2-7