E
TACH
5
4
x100
r/min 3
2
1
q 802013
| TACH |
| |
|
| 5 | |
|
| 4 | |
| x100 | 3 | |
q | r/min | ||
2 | |||
|
| ||
|
| 1 |
802014
EMU00138
This indicator shows the engine oil level. If the oil level falls below the lower limit, the warning indicator will start to blink. Refer to the sections “FILLING OIL” and “OIL LEVEL WARNING” for details.
1
cC
Do not operate the engine without oil. Serious engine damage will occur.
EMU01553
Overheat Warning Indicator
If the engine temperature rises too high, the warning indicator will start to blink. Refer to “OVERHEAT WARNING” for details.
1Overheat warning indicator
cC
q
e
YAMAHA
SPEED | w |
Km/h knot mph
km mile
TRIP TIME BATT
set mode r
802016*
Do not continue to operate the engine if a warning device has activated. If neces- sary, refer to the “TROUBLESHOOTING” section in this manual. Consult your dealer if the problem cannot be located and corrected.
EMU00140
DIGITAL SPEEDOMETERThis meter contains the speedometer, fuel meter with warning, trip meter, clock and voltmeter with warning.
1Speedometer
2 Fuel meter
3 Trip meter/clock/voltmeter
4 Warning indicator
NOTE:
After the main switch is first turned on, all portions of the meter come on as a check. After a few seconds, the meters will change to normal operation. Watch the meter when turning on the main switch to make sure all segments come on.