E

 

 

 

 

 

 

 

 

EMU01548

 

 

 

 

 

UP

 

 

 

 

 

 

 

 

PROCEDURE FOR TILTING UP

 

 

 

 

 

 

 

 

Power trim/tilt models

 

 

 

UP

 

 

1)

If there is a fuel joint or a fuel cock on

 

 

 

 

 

 

 

 

 

the boat, disconnect the fuel line or

 

 

 

 

 

 

 

 

 

close the fuel cock.

 

 

DN

 

DN

 

2)

Push the power trim/tilt switch “UP”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

until the outboard has tilted up com-

 

 

 

 

 

 

702014

 

 

pletely.

 

 

 

 

 

 

3)

Turn the tilt-support lever toward you

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and support the engine.

403035*

411043

411045

w

After tilting the engine, be sure to support it with the tilt-support lever. Otherwise, the engine could fall back down suddenly if oil in the power trim/tilt unit should lose pressure.

4)Once the engine is supported with the tilt-support lever, push the power trim/tilt switch “DN” (down) to retract the trim rods.

cC

Be sure to retract the trim rods completely during mooring. This protects the rods from marine growths and corrosion which could damage the power trim/tilt mechanism.

EMU00303

PROCEDURE FOR TILTING DOWN

Power trim/tilt model

1)Push the power trim/tilt switch “UP” until the engine is supported by the tilt rod.

2)Release the tilt-support lever.

3)Push the power trim/tilt switch “DN” (Down) to lower the engine to the desired position.

3-20