E
cC
|
|
|
| EL | |
|
| R | LEV | L | |
|
|
| VE | ||
| PE | LE |
| ||
UP | ER |
|
| ||
LO | W |
|
|
| |
|
|
|
| ||
8Make sure the main switch (on applica- ble models) is “OFF” before working on the battery.
8Reversal of the battery leads will dam- age the rectifier.
8Connect the RED lead first when installing the battery and disconnect
the RED lead last when removing it. Otherwise, the electrical system can be damaged.
8The electrical contacts of the battery and cables must be clean and properly connected, or the battery will not start the engine.
| Connect the RED lead to the POSITIVE (+) |
| terminal first. Then connect the BLACK |
000359 | lead to the NEGATIVE |
| |
| 8Using an accessory battery (option) |
| Use a connecting cable between the |
| terminals of the starting battery and |
| accessory battery. See the illustrations of |
| the wiring connections. This cable must |
| be made from wire equivalent to the start- |
| ing battery cable 3. |
r e t y 
q 
w
901014*
w
Use of smaller wire could lead to a fire.
1Battery for starting
2 Battery for accessories
3 Large red lead for starting battery
4 Small red lead for accessory battery charg- ing (optional part)
5 Large black lead
6 Negative connecting cable (optional part)
NOTE:
If a battery selector switch is desired, consult your YAMAHA dealer about correct wiring.