E

N

701015

701025

EMU00248

PROCEDURE FOR REMOTECONTROL MODEL

4)Place the remote control lever in the Neutral position.

NOTE:

The start-in-gear protection device permits the engine to be started only when it is in Neutral.

5)Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg. Then, install the lock plate on the other end of the lanyard in the engine stop switch.

w

8Attach the engine stop switch lanyard to a secure place on your clothing, your arm or leg while operating.

8Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan- gled, preventing it from functioning.

8Avoid accidentally pulling the lanyard during normal operation. Loss of engine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the boat to be thrown forward.

6)Turn the main switch to “ON”.

NOTE:

In case of dual-engine operation, when the main switch is turned on, the buzzer operates for a few seconds and stops automatically. Should either of the dual engines stall, the buzzer operates.

3-12