Adjusting the system parameters

4Press / to switch between “MON CHK: YES” and “MON CHK: SKIP”.

ENTER

MON CHK: YES

Setting the DEMO MODE

You can test the sound beam output from this unit to experience the sound beam.

1Repeat steps 1 to 3 in “Using the system parameters” on page 94.

2Set the operation mode selector to YSP.

TV/AV

YSP

3Press / so that “DEMO MODE” is displayed in the front panel display.

MON CHK: SKIP

•Select MON CHK: YES to activate the monitor check function.

•Select MON CHK: SKIP to deactivate the monitor check function.

5Press STANDBY/ON on the remote control to set this unit to the standby mode.

STANDBY/ON

ENTER

DEMO MODE

The new setting will be activated when you turn on the power of this unit next time.

Note

If you change the setting of “MONITOR CHECK”, “UP- SCALING” is automatically set to “OFF” (see page 87).

98 En