Yamaha YSP-4000 58 En, ■Decoder indicators, ■Input channel indicators, ■Surround modes and recommended sources

Enjoying surround sound

■Decoder indicators

Depending on the input source and the selected surround mode, the indicators in the front panel display light up as follows:

Status	Indicator
When PCM signals are being input		PCM
When DTS digital signals are being
input
When DTS Neo:6 is selected as the	+
surround mode
When Dolby Digital signals are		DIGITAL
being input
When Dolby Pro Logic is selected			PL
as the surround mode
When Dolby Pro Logic II is selected			PL
as the surround mode

y

•You can select an input mode (AUTO, DTS, or ANALOG) by pressing INPUTMODE repeatedly (see page 93).

•Discs encoded in DTS-ES, Dolby Digital 5.1 EX, Dolby Digital EX, or Dolby Digital Surround EX will be played back in DTS or Dolby Digital.

■Input channel indicators

Depending on the channel component of the current digital input signal, the input channel indicators in the front panel display light up as follows:

StatusIndicator

When 2-channel stereo signals are being input

When 5.1-channel signals are being input

■Surround modes and recommended sources

Surround mode		Recommended
		source
Dolby Pro Logic	–	All sources
	Movie	Movies
Dolby Pro Logic II	Music	Music
	Game	Games
DTS Neo:6	Cinema	Movies
	Music	Music
Neural Surround		XM Satellite Radio
(U.S.A. and
	–	(U.S.A. and Canada
Canada models
		models only)
only)

Notes

•When you select an input source (see page 47), the surround mode used for the previously selected input source is automatically selected.

•If the power of this unit is turned off and on again, the surround mode used for the previously selected input source before the power was turned off is automatically selected.

•If the surround modes are not available, “Prohibit” appears in the front panel display when you press SUR. DECODE.

•The surround modes are available:

–when the beam mode is set to a setting other than the 2- channel or 5-channel stereo playback (see page 62) and My Surround (see page 57).

–when the CINEMA DSP programs are turned off (see page 69).

–when the movie program is selected as the CINEMA DSP program (see page 68). In this case, only Dolby Pro Logic, Dolby Pro Logic II Movie, and DTS Neo:6 Cinema are available.

–when 2-channel signals are being input.

–when the Music Enhancer is turned off (see page 70).

58 En