XM™ Satellite Radio tuning (U.S.A. and Canada models only)

■Preset Search mode

Prior to selecting a preset channel in the Preset Search mode, you must preset the XM channels. For details, see “Presetting the XM™ Satellite Radio channels” on page 9.

1Press SEARCH repeatedly to select “PRESET SEARCH”.

SEARCH

■Direct Number Access mode

1Press SEARCH repeatedly to select either “ALL CH SEARCH” or “CAT SEARCH”.

SEARCH

ALL CH SEARCH

PRESET SEARCH

or

CAT SEARCH

2Press CAT/A-E ( / ) repeatedly to change

the preset channel group (A to E).

2 Press the numeric buttons (0 to 9) to enter

 

 

the desired three-digit XM channel number.

 

 

For example, to enter the number 123, press the

CAT/

ENTER

numeric buttons 1, 2, and 3.

 

A-E

 

 

 

 

 

 

 

 

 

5BEAM

ST+3BEAM

3BEAM

 

 

1

2

3

3Press ENTRY ( / ) repeatedly to change the preset channel number (1 to 8).

ENTRY

ENTER

The front panel display changes as follows:

<XM> --1

y

You can also use the numeric buttons to directly input the preset channel number.

<XM>

-12

 

 

<XM> 123

Notes

•To enter a one- or two-digit number, press the corresponding number button(s), and press ENTER to confirm the number. If you do not press ENTER, this unit automatically confirms the entered number after a few seconds.

•If you press a button other than the numeric buttons and ENTER during this operation, the Direct Number Access mode is canceled.

8 En