Playback

Press AUX1 (or AUX2) to play back a component connected to the AUX 1 (or AUX 2) jack on the rear panel of this unit.

AUX1

AUX1

AUTO

 

 

Press AUX3 to play back a component connected to the AUX 3 input jack on the front panel.

AUX3

AUX3

Playing back sources

Once an input source is selected (see page 47), you can play back the selected input source.

Note

This section uses a DVD player as an example of the playback source.

y

For details on your TV and DVD player, refer to the respective owner’s manual.

1Turn on the power of your DVD player.

2Switch to the video input on your TV using the remote control supplied with the TV and display the DVD menu screen.

Note

If necessary, turn down the volume of your TV until no sound is heard.

3Press DVD to select DVD as the input source.

DVD

4Play back DVD on your DVD player using the supplied remote control.

Audio signals from your DVD player are output from this unit.

y

You can use the supplied demonstration DVD to check the digital signals being input at the DVD player with the digital connection (optical/coaxial/HDMI). The input channel and LFE indicators light up when this unit detects the 5.1-channel signal input at the optical/coaxial/HDMI jack. If the PCM indicator lights up, confirm the settings of the digital output, bitstream output, DTS output, and/or HDMI output of the DVD player.

If the output volume is too low, increase the volume of this unit to around 45.

If you have set the appropriate remote control codes for your TV and DVD player, you can use the remote control supplied with this unit to operate these components. For details on how to set remote control codes, see page 103.

48 En