Adjusting the audio balance

You can adjust the sound beam output level of each channel by using the test tone or the audio output being played back in each beam mode to achieve a more true-to-life surround sound experience.

Using the test tone

You can use the test tone feature to output a test tone from each channel to manually balance the channel levels. Use this to set the channel levels so that the volume level of each channel is identical when heard from your listening position.

CH LEVELMENU

 

TV/AV

 

ENTER

 

YSP

TEST

RETURN

1Set the operation mode selector to YSP.

TV/AV

YSP

2Press TEST.

“TEST LEFT” appears in the front panel display and a test tone is output from the front left channel.

3Press / to select the channel you want to adjust.

The front panel display changes as follows:

TEST FRONT L

ENTER

TEST CENTER
TEST FRONT R
TEST SUR.R
TEST SUR.L
TEST SUBWOOFER

Note

“TEST SUBWOOFER” is only available when a subwoofer is connected to this unit and SWFR is selected for BASS OUT in SOUND MENU (see page 62).

4Press / to adjust the channel volume.

TEST

ENTER

Control range: –10.0 dB to +10.0 dB

T E S T X L E F T

OPERATION

ADVANCED

 

 

English

67 En